Hotend Poop Deflector for A1 and A1 Mini

I have been looking for poop chutes on MakerWorld for a long time and have printed several

Inclined, not inclined, with attached baskets, and with the need for Kapton pieces to prevent poop from sticking

This is a chute deflector that clips onto the waste brush and DOES NOT require supports. The deflector locks into place thanks to a small protrusion on the back of the component, and the addition of a reinforcement bar in the center should prevent it from deforming or coming loose over time

I created grooves to ensure that the poop does not stick to the wall and falls away quickly. It does not require Kapton tape or anything else (in the photo below you can see both the lock and the grooves)

I recommend printing it in PETG to withstand the high temperatures of the poop

You can also find the basket I made in combination with this deflector, at this link (you can also find it in the photo below)

It clips on with a click, by sliding it in this way:

🙏 If my designs brighten up your day, you can support my work by giving me a free boost. Your support is invaluable! Thank you!

If you’d just like to make a one-off donation, you can buy me a coffee here ;)

https://buymeacoffee.com/byphildesign