Bento Heater remix/mini heater, air circulator
Print Profile(2)
Description
Boost Me (for free)
💡 Enjoying this design? Give it a boost! Boosting is completely free and helps bring more visibility to this creation. If you think it deserves some extra recognition, a simple boost goes a long way in supporting my work. Thanks for your support and for keeping the Maker spirit alive! 🚀🔧 Let me know if you'd like any tweaks to match your style! 🔥
Throttle X Design 3D
🚀 Precision. Innovation. DIY Mastery.
Bringing ideas to life with welding, fabrication, CAD, and 3D printing.
I wanted to use the fan of my mini heater to filter some bad fume inside my printer
I used the bento box for the HEPA filter and then remix it with the mini heater rack and shield!!!!
note you need the shield on the bottom with my bento heater
Boost Me (for free)
If you like my design, your support means a lot! Follow me, leave a rating, or give me a boost—every bit of encouragement helps. Thank you!
I also used the aux fan cover that use same HEPA filter
with all these mods I keep the temp inside my printer at 51c when I print ASA or ABS
all the parts are printed in ASA or ABS
amazon link
6 ft 90 degree angled power AC
m3 screws
6mmx2mm magnet
I work on a way to control my inside temp with a thermostat but this will be in the future
I also bought a wi-fi Power bar to power ON or OFF my heater and my added L.E.D. when I'm not near the printer
🔗 Follow for more designs!
📌 DIY | CAD | 3D Printing | Fabrication
⚙️ Throttle X Design – Pushing Boundaries, One Print at a Time
This remix is based on
License
Comment & Rating (41)