A1 Wall Support Brace
Print Profile(1)
Description
If you mount the AMS on top of the A1, you will notice that during printing, everything moves heavily. This can eventually cause problems for the printer itself and risks breaking the AMS supports. Unfortunately, the center of gravity rises, and with movement, this becomes inevitable. The rear feet improve things somewhat but not entirely. I designed this brace to be inserted into the upper bar of the A1 and fixed to the wall at the back with a wall plug. The length is adjustable up to 320 mm; in any case, the inner piece can be extended. The existing holes assume the wall is 290 mm from the bar. A 5 mm cable tie is needed to secure the support to the bar via the lower piece and two M3 x 16 screws to secure the two telescopic pieces
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)