Simple feet extensions that fit snuggly to the OEM feet and raise the printer to a total of 30 mm from the surface to the edge of the printer.
30mm is the perfect heigh to clear the cable from the AMS and the Sunlu S2 drier if they are oriented with their backs to the printer.
The feet can be printed in any material and fit snugly to the OEM feet. I have provided a specific print profile optimized for Sunlu TPU if you want, but should work for other manufacturers also.
Due to different revisions of the printer you must select either 28 or 24 mm feet, to get an total height of 30mm. Please measure the existing gap between the surface and the edge of the printer. Example: if the exisiting gap is 6mm, then choose the 24mm feet to get a total of 30mm.
I recommend to use them with my build plate rack https://makerworld.com/en/models/190455 and filamenter dryer holder https://makerworld.com/en/models/192733