Masato88

simontaen

Teisman

in what material is everyone printing this ?  I guess pla and petg are not heat resistant enough ?


user_3273083771

lio1219

Nordic Overland & Innovation

0.2mm layer, 2 walls, 20% infill, no support

Freezer

user_2135006111

cover

IMG_6525.JPG

IMG_6527.JPG

IMG_6526.JPG

plate_1.png

IMG_6523.JPG

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2>Beschreibung (english below) </h2><boostme><boosttitle>Boost Me</boosttitle></boostme>Dies ist ein parametrisierbarer Y- und T-Stück Generator für Warmluft- oder Schlauchsysteme (z. B. Truma, Webasto, Eigenbau).<ul><li>Alle Maße lassen sich flexibel einstellen:<ul><li>Durchmesser (mm) – wahlweise alle gleich oder individuell je Abgang</li><li>Wandstärke (mm) – einheitlich für das gesamte Bauteil</li><li>Längen (mm) – gleich oder für jeden Abgang separat</li><li>Winkel (°) – z. B. 45°/135° für Y-Stücke oder 90° für ein klassisches T-Stück</li></ul></li><li>Der Code verhindert automatisch Kollisionen bei großen Durchmessern und kleinen Winkeln.</li><li>Eignet sich zur Luftverteilung, für Prototypenbau oder als Ersatzteil.</li></ul>Hinweis: Wenn der Winkel auf 90° gesetzt wird, entsteht statt eines Y-Stücks ein T-Stück.<h2>Description</h2>This is a parametric Y- and T-fitting generator for warm air or hose systems (e.g. Truma, Webasto, DIY).<ul><li>All key dimensions can be customized:<ul><li>Diameter (mm) – either the same for all pipes or individually adjustable</li><li>Wall thickness (mm) – applies to the entire part</li><li>Length (mm) – same for all or different per branch</li><li>Angle (°) – e.g. 45°/135° for Y-fittings or 90° for a classic T-fitting</li></ul></li><li>The code automatically prevents collisions when large diameters and small angles are chosen.</li><li>Suitable for air distribution, prototyping, or as a replacement part.</li></ul>Note: Setting the angle to 90° turns the model into a T-fitting.

<h2>Description (english below) </h2><boostme><boosttitle>Boost Me</boosttitle></boostme>This is a parametric Y- and T-fitting generator for warm air or hose systems (e.g. Truma, Webasto, DIY).<ul><li>All key dimensions can be customized:<ul><li>Diameter (mm) – either the same for all pipes or individually adjustable</li><li>Wall thickness (mm) – applies to the entire part</li><li>Length (mm) – same for all or different per branch</li><li>Angle (°) – e.g. 45°/135° for Y-fittings or 90° for a classic T-fitting</li></ul></li><li>The code automatically prevents collisions when large diameters and small angles are chosen.</li><li>Suitable for air distribution, prototyping, or as a replacement part.</li></ul>Note: Setting the angle to 90° turns the model into a T-fitting.<h2>Description</h2>This is a parametric Y- and T-fitting generator for warm air or hose systems (e.g. Truma, Webasto, DIY).<ul><li>All key dimensions can be customized:<ul><li>Diameter (mm) – either the same for all pipes or individually adjustable</li><li>Wall thickness (mm) – applies to the entire part</li><li>Length (mm) – same for all or different per branch</li><li>Angle (°) – e.g. 45°/135° for Y-fittings or 90° for a classic T-fitting</li></ul></li><li>The code automatically prevents collisions when large diameters and small angles are chosen.</li><li>Suitable for air distribution, prototyping, or as a replacement part.</li></ul>Note: Setting the angle to 90° turns the model into a T-fitting.

Y-T-Piece/Pipe Customizer

ASIA

Print Profile(1)

Description

Description (english below)

Description

Comment & Rating (10)

License

Related Models