LEVEL 9 of Tower maze - the ultimate maze!

Who’s up for a massive challenge? Well here’s one for you - I designed 51 different maze levels, each more complex than the previous one. This design is for the maze level 9. While the maze design is level 9, the cup that has the hooks is designed to fit all 10 levels, so if you choose to do more than one level, you don’t need to print the cup 10 times (unless you want to).

Print specifications:

LEVEL 9 MAZE:

Print Dimensions: Height =11 cm (4.33 Inches) | Diameter of 5.35 cm (2.11 inches)
Layer height: 0.2 mm

Infill type: Gyroid

Infill percentage: 12%
Print speed: 250 mm/s 

Print time: 2 hours and 02 Minutes

Amount of material required: ~ 17 m

The case for the maze

Print Dimensions: Height =9.8 cm (3.86 Inches) | Diameter of 5.4 cm (2.13 inches)
Layer height: 0.2 mm

Infill type: Gyroid

Infill percentage: 12%
Print speed: 250 mm/s 

Print time: 2 hours and 29 Minutes

Amount of material required: ~ 20.4 m


Other levels can be found here:
Level 1

Level 2

Level 3
Level 4

Level 5

Level 6

Level 7

Level 8

Level 9

Level 10

Level 11

Level 12

Level 13

Level 14

Level 15

Level 16

Level 17

Level 18

Level 19

Level 20

Level 21

Level 22

Level 23

Level 24

Level 25

If you are interested in more levels, consider boosting any of these levels as that enables me to make more designs in a shorter span of time.  Thank you for your support