Who’s up for a massive challenge? Well here’s one for you - I designed 15 different maze levels, each more complex than the previous one. This design is for the maze level 10. While the maze design is level 10, the cup that has the hooks is designed to fit all 10 levels, so if you choose to do more than one level, you don’t need to print the cup 10 times (unless you want to).

Print specifications:

LEVEL 10 MAZE:

Print Dimensions: Height =11 cm (4.33 Inches) | Diameter of 5.35 cm (2.11 inches)
Layer height: 0.2 mm

Infill type: Gyroid

Infill percentage: 12%
Print speed: 250 mm/s 

Print time: 2 hours and 02 Minutes

Amount of material required: ~ 17.1 m

The case for the maze

Print Dimensions: Height =9.8 cm (3.86 Inches) | Diameter of 5.4 cm (2.13 inches)
Layer height: 0.2 mm

Infill type: Gyroid

Infill percentage: 12%
Print speed: 250 mm/s 

Print time: 2 hours and 29 Minutes

Amount of material required: ~ 20.4 m


Other levels can be found here:
 

Level 1

Level 2

Level 3
Level 4

Level 5

Level 6

Level 7

Level 8

Level 9

Level 10

Level 11

Level 12

Level 13

Level 14

Level 15