Side Mount "AMS lite" Spool Holder + Hub Remixed by TheMiguelBi

Remixed by

TheMiguelBi

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

PLA_0.2mm layer, 2 walls, 30% infill

Designer

5.2 h

2 plates

4.9(72)

Open in Bambu Studio

Boost

148

332

166

499

364

Released

Description

I needed a lateral spool holder and at the same time a splitter to use the single coil more easily.
This REMIX was necessary!
2 birds with one stone! '^_^

The remix consists of the union of these 2 splendid components (thanks to ryan.fransen and ultrajaxel), and the addition of the Bambu Lab logo to the HUB.
I also created a negative part so that it all coupled with my PTFE support that I had already installed
(a photo to illustrate the "green" component):

Slightly modified in shape, but the slim version works equally well: https://makerworld.com/en/models/83098#profileId-88643

- - - - - - -

Spool Holder:

The spindle which holds the AMS Spool holder is nice as it incorporates a nice click mechanism to hold it on as well as it incorporates the auto rewind spring mechanism of the AMS spool holders. This works very well.

This is the one you need - ensure you get the Green one:
https://eu.store.bambulab.com/en-it/collections/spare-parts-for-ams-lite/products/ams-lite-rotary-spool-holder

Hub:

BambuLab now sells their 4-in-1 PTFE Adapter which serves the exact purpose of this mod.

WARNING:
Be careful to purchase the correct HUB (there are 2 similar ones).
Here is the link to the Global store:
https://store.bambulab.com/products/ams-lite-filament-hub?_pos=5&_sid=8442e857c&_ss=r

Just depress the black end of the PTFE tube coupler and slide it into the model and the AMS hub LITE. The model will keep the black end depressed, which is essential to stop the PTFE teeth from interfering with filament input.

For assembly 4 screws required:
- 2x M3x25mm (top)
- 2x M3x13mm (bottom)

So Happy with these add-ons!!

Comment & Rating (166)

@apt3d

Can't wait to get this printed. Thanks for remixing this awesome spool holder. I was curious, where did you get the AMS buffer guide from in this pic? I can't seem to find one that will fit with your spool holder. Any help is appreciated. Thanks.

The designer has replied

@TheMiguelBi

Sorry, I had to add the link, and I always forgot. it is also a creation of ultrajaxel, you can find everything in his profile. Anyway here it is: https://makerworld.com/en/models/83098#profileId-88643 actually updated the piece by editing it. I hope it still fits well with my remix. otherwise write to me, I will provide you with the right file. 👍🏻

@apt3d

Replying to @TheMiguelBi :

Thanks for the quick reply, I really appreciate it. I had my eye on that one, but wasn't sure. Yours does look a little thinner on the base that screws into the case. If you look at the 3rd one down from ultrajaxel's model that you linked, it looks as though someone remixed it with a thinner base. What do you think?

@TheMiguelBi

Replying to @apt3d :

Originally there were 2 versions. The thin one was the version to add the original balbulab metal spool holder. And that's the version I printed. However if you look at the photo of "euforia" below, you will see that the new model fits well too. So don't worry!

@totalsys

After printing this out along with the PTFE bracket on the bottom and only today receiving the Bambu Lab 4in1 splitter I see they do not work together. And the original version of the spool holder isn’t going to work either as everything needs that top screw hole on the back. Help! I’m in need of a remix.

The designer has replied

@TheMiguelBi

Sorry, I would like to help you but I don't understand your problem. The bracket for the "AMS HUB" has 2 holes. When printing there is some fill to remove. But the 2 fixing holes are there!

@totalsys

Replying to @TheMiguelBi :

My problem is with the splitter I got from Bambu Lab. it doesn’t fit the hub bracket and if I wanted to use it without the hub bracket it won’t fit the cut out you put into the spool holder.

@totalsys

Replying to @totalsys :

Although looking at the Bambu Wiki photos they aren’t even using the bracket attached to it on the X1C. I can just cut that off to get a closer fit with the spool holder part.

@rapo

Boosted

Print Profile

PLA_0.2mm layer, 2 walls, 30% infill

Came out simply bueatiful! Matches my P1S so good with these colors also. Just need to wait for the remaining parts from Bambu Lab so I can mount it.

The designer has replied

@TheMiguelBi

Excellent result! 👌🏻 ...it won't disappoint you!

(Edited)

@rapo

Boosted

Replying to @TheMiguelBi :

Quick question tho, what is the use of the PC4-M10 pneumatic coupler? Like why do I run the PTFE tube trough that, compared to just making the hole 4mm wide? Hope that makes sense

@TheMiguelBi

Replying to @rapo :

Yes exactly. That connector holds the PTFE tube securely, which would otherwise slide backwards during printing. Many people mount this fitting backwards (to prevent the hose from slipping). Instead, I used a special ring that blocks the release mechanism. Therefore in the photo you will see it installed on the front in my case.

(Edited)

@Euphoria

Amazing design! love it

The designer has replied

@TheMiguelBi

I love this color combination! Thanks for sharing your creation!

@TheMiguelBi

What version of PTFE guide did you print below? Is it still ultrajaxel? Because the fixing part with the printer seems thinner. Thank you

@Euphoria

Replying to @TheMiguelBi :

Yes it is. I took the 2nd plate which is bit thinner. https://makerworld.com/en/models/83098#profileId-88643

@Ciuf_Ciuf

Print Profile

PLA_0.2mm layer, 2 walls, 30% infill

I consider it an excellent solution for those, like me, who have more than one AMS and need to disconnect and reconnect the PTFE each time to change spool. It's inevitable to forget to reconnect it, causing a mess🤯. With this solution, I can attach everything together, even the dryer, load the filament, and be at ease. Not to mention the arrangement of the printers, which makes it challenging every time I want to use an external coil. Thank you for sharing the file, I love it!🥰

The designer has replied

@TheMiguelBi

I've also had the experience of starting a print and forgetting to reconnect! XD It's truly an accessory that once you try it, you can't do without it. Too comfortable and functional! Thanks for sharing your creation

@Romain12345

Print Profile

PLA_0.2mm layer, 2 walls, 30% infill

A must have, if you want the spool on the left

The designer has replied

@TheMiguelBi

Thx!

@filippo3Ddesign

Print Profile

PLA_0.2mm layer, 2 walls, 30% infill

fantastic

The designer has replied

@TheMiguelBi

Thx for sharing!

@TommaPic

Print Profile

PLA_0.2mm layer, 2 walls, 30% infill

spettacolare, unica pecca il pirolo da avvitare un po’ duro, ma nulla che una buona pinza non superi, veramente ottimo supporto

The designer has replied

@TheMiguelBi

Grazie per la condivisione! si, ho passato leggermente una lima e poi mi son distrutto una mano per avvitarlo. Pensavo il PLA non fosse il massimo per creare la parte filettata. magari in ABS o altro funziona meglio 🤷🏻‍♂️