Print Profile(1)
Description
It would be great if you follow me to stay up to date on new models and updates 💚💚💚 |
Based on the Mini Easel, I have now designed this highly customizable version of an easel. The model uses also Print-in-Place Technology and do not need any support structures, when printing.
There are various parameters that can be used to change the size of the easel without compromising the print-in-place technique.
| Parameter | Default Value | Range of Values* | Meaning of the Parameters |
|---|---|---|---|
| pEaselWidth | 40 mm | ≥ 20 mm and ≤ 320 mm | Width of the easel stand |
| pEaselHeight | 60 mm | ≥ 26 mm and ≤ 350 mm | Height of the easel stand |
| pLegWidth | 4 mm | ≥ 2.8 mm and ≤ 1/5 of EaselWidth | Width of the easel legs |
| pLegAngle | 20 deg | ≥ 17.5 deg and ≤ 22.5 deg | Angle between the legs when easel is upright |
| pTrayWidth | 40 mm | ≥ EaselWidth and ≤ 320mm | Width of the tray |
| pTrayThickness | 3 mm | ≥ 1.6 mm and ≤ LegWidth | Thickeness of the tray |
| pTrayDepth | 12 mm | > pLegWidth and ≤ 1/3 of EaselHeight | Depth of the tray |
| pTrayPos | 12 mm | > 0 mm and ≤ 1/2 of EaselHeight | Position from floor to bottom edge of shelf |
| pTrayAngle | 0 deg | > 0 mm and ≤ LegAngle | Angle between tray and legs Using the same value as for LegAngel results in the tray being positioned horizontal while the easel is upright |
| pScaling | 1 | ≥ 0.5 and ≤ 5.0 | Using Scaling will result in up- or downscaling of the above values and is the easiest way to change the size of the easel |
* Adjusting the model with values outside the range results in the maximum or minimum possible values being used automatically. This prevents the structures of the adjusted model from being destroyed.
A tolerance test is recommended to determine printing accuracy. This is a simple and quick test that only requires 2g of filament:  |
Please support my work - all models are free of charge! Boost Me (for free) A 🚀boost🚀 for a model shows your appreciation and is like applause for an artist 🙏 Further possibilities to support my free of charge models are:
Membership You are welcome to become a member - either to be a sponsor my work or to sell prints of ZiMADE models as a commercial member. Join
|
👍 Many thanks for all of your support 👍 |
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (30)