Pokémon Discs and More - Free 3D Print Model

Search models, users, collections, and posts

Juanill0

Toys & Games>Other Toys & Games

IP Report

Print Profile(5)

All

A1 mini

X1 Carbon

P1S

X1E

H2D

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

2.4 h

1 plate

5.0(4)

0.2mm layer, 2 walls, 15% infill

Designer

54 min

1 plate

5.0(2)

0.2mm layer, 2 walls, 15% infill

Designer

1.7 h

1 plate

5.0(1)

0.2mm layer, 2 walls, 15% infill

Designer

2.4 h

1 plate

4.0(2)

Click to see more

Open in Bambu Studio

Boost

Released

Description

Content has been automatically translated.

Show original

POKÉMON TOPS AND MORE

As a collector of retro objects, I am deeply immersed in the world of collectible tops. The most famous are undeniably the Pokémon tops.

Well, since one of my official tops was missing a lid, I decided to design and 3D print it. The result was so satisfactory that I then decided to design the body, and taking it a step further, with a little "intelligent" assistance, I was able to create stickers similar to the originals.

Therefore, I share this design with you, both for those who enjoy collecting and those who wish to complete a missing piece.

I also include a PDF template with sticker designs.

If any are missing and you decide to share them, I will be delighted to upload them and update the document!

FULLY COMPATIBLE WITH ORIGINAL TOPS

PRINTING NOTES:

I experimented with several ways to print the model, therefore, the version I present is the one that has yielded the best results in terms of print quality and durability, thus it includes supports.

The tolerances of the material being used must be considered. It may be necessary to increase or decrease the horizontal expansion by +/- 0.01 to ensure a perfect fit.

Please, resale on external platforms is NOT permitted.

Pokemon

Tazos

discs

Documentation (1)

Other Files (1)

Portatazos.pdf

Comment & Rating (15)

@b.camp

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect!

The profile uploader has replied

Show original

@Juanill0

Thank you for being the first

(Edited)

Show original

@user_2349363911

thank you for the contribution but that profile uses too much filament

Show original

@user_230102453

Print Profile

0.2mm layer, 2 walls, 15% infill

Extremely useful model for those who have tazos and don't want to spend money on the original case. The only detail that bothers me is that the tube is completely straight and doesn't have the slightly tapered shape of the original. The supports work wonderfully well, but I wonder if it would be possible to use less material on them. Thanks for the model!

Show original

@TheRock06

Print Profile

0.2mm layer, 2 walls, 15% infill

Very good, I edited several sizes https://vm.tiktok.com/ZNRknDSH2/

Show original

@user_2170325718

Does it print with supports? I don't know if it prints as is or if I have to turn the pieces over... I'm just starting and I don't understand much yet

The designer has replied

Show original

@Juanill0

The design prints with supports yes but if you print from my project it is already prepared 👍

Show original

@user_2170325718

Replying to @Juanill0 :

thank you! I don't know why when I open a file (not yours, all of them, which are supposed to already have supports... I open it in Prusa Slicer, I click to slice... and they don't come out... what am I doing wrong? Do I have to force it and select the support type... or is there no way... haha

Show original

@Juanill0

Replying to @user_2170325718 :

What I am sharing is the project. Within the project, I have supports enabled, however the 3D model (STL) does not include supports. If you need to print with supports, you have to enable them in the slicer

Show original

@user_2349363911

Print Profile

0.2mm layer, 2 walls, 15% infill

it needs work on the supports profile but the average user should be able to do it on their own and the design of the holder could be more robust

Show original

@ARKB1

Print Profile

0.2mm layer, 2 walls, 15% infill

@crissanchez

Print Profile

0.2mm layer, 2 walls, 15% infill

@crissanchez

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_3219806455

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.