Elegoo Phecda Honeycomb alignment - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Magrin

Tools>Machine Tools

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

2.5 h

1 plate

4.7(47)

A1Mini, Multiplates, 0.16mm layer, 3 walls, 20% infill

4.3 h

3 plates

3.0(2)

Open in Bambu Studio

Boost

206

747

431

Released

Description

A genius design by Sbaugh1969 to get the perfect alignment for the honeycomb bed on the Elegoo Phecda Laser cutter!

All the parts/plate needs to be printed twice!

I did not have a printer larg enough to print the arms as one piece so I split them in two and added connectors.

When fixing the arms together I recommend using a little superglue.

It's important to remember which of the arms belong together so the fit will be correct.

For exampel: Arm_1.stl_A and Arm_1.stl_B are placed next to each other to make this easy to remember.

I have added the original arms if you have a printer that is big enough

Comment & Rating (74)

@myworkshoplife

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Made it frome ABS looks great was a easy Print, lets see how it fits once the second pair is done :)

@sendnoobs

Hi did you alter the legs I'm loading files up and missing the holes to join

@myworkshoplife

Boosted

Replying to @sendnoobs :

Hi no i´ve just printed the files from here. Maybe your Honeycomb is a bit different? (I have one of the Kickstarter machines so maybe Elegoo did some adjustments?

@bseppo

Too small for 400x400

The designer has replied

@Magrin

sorry to hear. this is designed for the original Elegoo honey comb

@UoAoE3D

Print Profile

0.2mm layer, 2 walls, 15% infill

Flawless

@psophro

Boosted

Awesome model, super practical, thank you very much

Show original

@ruhrpottschaf

Print Profile

0.2mm layer, 2 walls, 15% infill

Flawless print. A very useful addition to my Phecda Laser. 👍

@barath.csaba.88

Print Profile

0.2mm layer, 2 walls, 15% infill

@LKT94

Print Profile

0.2mm layer, 2 walls, 15% infill

@captainpunch

Print Profile

0.2mm layer, 2 walls, 15% infill

Design doesn't account for the screws that sit proud of the frame on the Elegoo Honeycomb Panel, nor does it account for the offset from center-of-footprint that the working area has. The "braces" have nothing but their friction fit holding them together and, because of the aforementioned screws, are not long enough to actually come together in my assembly. Model is also low poly, and the circles and arcs are noticeably faceted, this may serve to center the feet on the inside of the pocket, but the exterior clashes with the laser. I ended up screwing the corner plates to my table and calculating an offset to use in my files to work around these issues until I find a better solution.