Dual Source Bowden Hub - Splitter Y

A little coffee, a big smile! ☕ 

Click below and support my creativity.

Subscribe to my Telegram channel: support and assistance throughout the Bambu Lab world, with the opportunity to ask me any questions or requests.

Click on the symbol below

🔀 Y-Adapter for PTFE Tubing - Compatible with Bowden Systems

This Y-adapter allows you to manage the filament in a simple and clean way 🎯, allowing the use of external spools with your printer (e.g. Bambu Lab) without having to disconnect the Bowden tubes.

⚙️ Main Features

🔧 Deep and secure insertion: The PTFE tubes are inserted firmly to ensure stability and reduce wear.

🌀 Smooth filament flow: A precise internal shaping guides the filament without obstacles.

🔄 Compatible with black PC4-M6 and PC4-M10 pass-through connectors.
⚠️ Attention: blue connectors are not compatible!

✅ Key Benefits
🚫 No support needed during printing

✂️ Clean profile without overhangs

🧩 FDM optimized geometry

⚡ Quick and intuitive installation

🔄 After insertion, slightly rotate the tubes back and forth to check their correct positioning.

✂️ Cut the pipes cleanly and perpendicularly (no slanted cuts!)

🧴 A glue stick can help improve the seal of the pipes.

⚠️ Do not over-tighten the connectors: the tapered threads can create damaging pressures.

If you love clever and creative 3D printing projects, if you love keeping everything organized, and above all, if you love printing...then you'll probably appreciate what I create every day!

Check out all my designs on MakerWorld, you can find them here:

🔗 https://makerworld.com/it/@Officine_Casper

I regularly upload practical and original projects, designed for everyday use or for all enthusiasts like me.
Download what you like and, if you feel like it, leave a like or a comment...any feedback is greatly appreciated and gives me the motivation to keep creating! 🙌

⚠️ Printing Problems ⚠️

I know how frustrating it can be to encounter difficulties during a 3D print, and I always appreciate constructive criticism or suggestions for improving my models. 🙏

However, I kindly ask you to always ensure your printer is properly calibrated, specifically:

⚙️ Correctly set extrusion flow

🧲 If you have adhesion issues, try using a brim or a gripper

💡 Important note: Any print failures are not due to the model or print profile.

All files are thoroughly tested before publication, and I always share the print profile I used for the published results.

Thank you so much for your understanding and…

✨ Happy printing, everyone! 🖨️