A1 Lubricant & Clean Nozzle for WD40
Print Profile(7)
Description
Boost Me (for free)
Your boost is the best support for my work!!
User Discretion
Please check the Bambu official instruction for WD-40 at the link below
https://wiki.bambulab.com/en/a1-mini/maintenance/lubricate-y-axis-with-wd-40-multi-use-product
- "WD-40 Multi-Use Product" is strongly recommended
- During the operation, please handle with care and ensure that lubricant does not come into contact with the surface of the textured plate. It is recommended to remove the textured plate from the heatbed during the operation to avoid any contamination, as it will lead to adhesion issues.
WD40 cap (tube)
All nozzles could share the WD40 cap (tube), the standard WD40 nozzle diameter is 4mm, but i also made an European version 3mm
 | Nozzle Variants：
|
Y-Axis & Z-Axis
From the left side to right side, just simply change the orientation of the nozzles
 |  |
 |  |
 |  |
Update for Nozzle Cap (2025/11/04)
the design has been improved for better strength.
it is now printed in the horizontal orientation.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (789)