Silica Box Container filament dryer 4l box storage dry box trockenbox hygrometer

Silica Box Container filament dryer 4l box storage dry box trockenbox hygrometer

Boost
13
41
12

Print Profile(2)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
47 min
1 plate
4.3(6)

0.2mm layer, 2 walls, 15% infill 5 pieces
0.2mm layer, 2 walls, 15% infill 5 pieces
Designer
3.4 h
1 plate
5.0(2)

Open in Bambu Studio
Boost
13
41
12
0
89
80
Released

Comment & Rating (12)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
Great print
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
top is too loose, doesn't stay put, needs to have a tighter fit so desiccant doesn't fall out if you turn the base over
The designer has replied
0
Reply
as you see in the pictures i use rubber straps to Secure it, it is designed that way:) i dont want a tight fit to avoid damage because i change the silica often please look at the Print before you Print it …
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
gutes Modell. leider ist der Deckel zu locker
The designer has replied
0
Reply
Hallo, der ist nicht zu locker, nutze ihn wie auf dem bild mit einem Gummiband, so lässt er sich leichter lösen um de perlen öfter zu wechseln
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
It's a nice design but needs rubber bands or something to hold it closed.
The designer has replied
0
Reply
yes, thats the design 😃u see it on the pictures, i Design it to use Rubber bands 🙈
0
Reply
Used a scaling factor of 99% for the lid for a snug fit.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill 5 pieces
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill 5 pieces
0
Reply
No more