Bambu Lab A1 Side Drag Chain Z-Axis Drag Chain - Free 3D Print Model

Search models, users, collections, and posts

user_703481669

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

A1 mini

H2D

X1E

P1S

X1 Carbon

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer height, 3 walls, 30% infill, The model is relatively small, please add an appropriate amount of brim to prevent warping

Designer

3.3 h

1 plate

4.7(54)

Better Bed Adhesion - PLA print

3.6 h

1 plate

4.8(8)

Open in Bambu Studio

Boost

455

1203

1.3 k

844

Released

Description

Content has been automatically translated.

Show original

Bambu A1 Side Cable Chain

In addition to the printed parts, one M3 screw with a length of 23-25MM is required, the kind that comes with Bambu. If you have an AMS lite, you can remove one from the AMS; otherwise, buy one according to the picture.

May 27, 2025 Update:

1. Cable chain beautification

2. Base detail optimization.

If you have any questions, please leave a message. Thank you everyone

Boost Me (for free)

Your support is my greatest motivation!

Comment & Rating (76)

@Sachakins

Boosted

Print Profile

0.2mm layer height, 3 walls, 30% infill, The model is relatively small, please add an appropriate amount of brim to prevent warping

Easy print, first time success. Just right amount of slack at full extension.

(Edited)

GIF

@user_640752761

Print Profile

0.2mm layer height, 3 walls, 30% infill, The model is relatively small, please add an appropriate amount of brim to prevent warping

I enjoyed it very much

Show original

@PrintersWorld

Good chain, works flawless. In my case the cable holder broke two times when i tried to attach the chain (printed with PETG HF). So i thickened the sides and now it works perfectly.

@user_2238707027

Stuck here, need improvement

@user_1037905285

I'm printing with PLA plastic, and I'm having trouble with the guide rail being too tight, bending and touching the nozzle. I've removed it, and this model doesn't suit me, which is quite disappointing.

@user_1142000832

Print Profile

0.2mm layer height, 3 walls, 30% infill, The model is relatively small, please add an appropriate amount of brim to prevent warping

a beautiful print, now just install

Show original

@Davik59

Print Profile

0.2mm layer height, 3 walls, 30% infill, The model is relatively small, please add an appropriate amount of brim to prevent warping

Great, everything fits as it should. Works perfectly. :)

@user_1021928578

Print Profile

0.2mm layer height, 3 walls, 30% infill, The model is relatively small, please add an appropriate amount of brim to prevent warping

Keeping the cable away from the spools. Nice design apart from the cable not sitting right in base, but that could just be how I've done it. Thank you

@PixelFanLabs

Print Profile

0.2mm layer height, 3 walls, 30% infill, The model is relatively small, please add an appropriate amount of brim to prevent warping

(Edited)

Other Issues:The screw is not a M3x25 even if it would work. You would be rethreading the hole. It needs a BT3x25 self-tapping screw which is hard to find. The chain is not long enough even though it seems to be during normal operation. During homing, when it reaches the top, it pulls up on the chain and you can see deformation of the bottom piece(this is the chain itself, not just the cable).Seems to be a use at your own risk kind of model.

@fum3dmdz

Print Profile

0.2mm layer height, 3 walls, 30% infill, The model is relatively small, please add an appropriate amount of brim to prevent warping

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.