Alternative Holding Clips for Turbo Rib Roller

These alternative clips are a custom clip mod designed for the Turbo Rib Roller AMS Lite Spool Adapter.

Unlike the original clip, these clips are engineered to remain stationary and do not turn with the roller.

To install:

• Install roller
• Insert each half into its corresponding AMS spool arm, i.e. green parts in the green arms, orange in the orange arms.
• Insert gray pin for a snug fit.
   

To remove:

• Brace the AMS Lite with one hand.
• Pull the pin out with the other hand. Note that the fit is intentionally snug.
• Remove the two halves once the pin is out.
   

Printing Instructions

• Print two green plates and two orange plates to yield a complete set of clips for your AMS lite.
• The green and orange colors are suggested for visual association with the respective spool arms, but feel free to customize.

The TurboRib Roller works seamlessly with the original AMS Lite stand and is fully compatible with my custom-designed vertical rotating stands:

• The Original A1 Mini AMS Lite Rotating Top Mount Vertical Stand
• AMS Lite Rotating Vertical Stand
• AMS Lite Rotating Vertical Tray Stand
• AMS Lite Rotating Stand for A1