AMS Lite Rotating Vertical Tray Stand

AMS Lite Rotating Vertical Tray Stand

This model serves as the base for an AMS Lite Vertical Rotating Tray Stand, offering a simple yet functional design.

The stand requires just two parts:

1. The base included in this model.
2. The ‘AMS Lite Holder’ from my A1 Mini AMS Lite Rotating Top Mount Vertical Stand project.

Instructions:

1. Print this base model.

2. Go to my A1 Mini AMS Lite Rotating Top Mount Vertical Stand project and print the ‘Rotating Holder’ part. 

   

3. Once printed, unscrew the original AMS Lite base from the AMS Lite unit and replace it with the newly printed ‘AMS Lite Holder’.

That’s it! You now have a fully functional AMS Lite Vertical Rotating Stand. Enjoy!

How tall is it?

• The tray stand itself is 84mm tall, and the AMS Lite Rotating Vertical Tray Stand Extender adds an additional 53mm of height. 
• Combined the tray base, extender, AMS Lite, and a spool loaded at the top reach a height of approximately 590mm (23.23 inches).
• To ensure proper clearance, I’d recommend having at least 610mm (24 inches) of height available.
• If you choose not to use the extender, you’ll save about 50mm (2 inches) of height.

Do you need a longer ams-lite cable? I recommend this extension cable.

If you like this model, also check out:

• The Original A1 Mini AMS Lite Rotating Top Mount Vertical Stand
• AMS Lite Rotating Vertical Stand
• AMS Lite Rotating Vertical Tray Stand Extender
• AMS Lite Rotating Stand for A1

Consider pairing this stand with my TurboRib Roller, a replacement roller designed specifically for the AMS Lite system:

• TurboRib Roller - AMS Lite Replacement Roller