Modular Seed Spacing Tool - Free 3D Print Model

Search models, users, collections, and posts

sdaendi

Household>Garden

IP Report

Print Profile(2)

All

X1E

H2D

P1P

P1S

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

PLA Basic Profile

Designer

8.1 h

2 plates

4.8(124)

0.2mm layer, 4 walls, 25% infill - Fixed handle screws

18 h

3 plates

4.7(25)

Open in Bambu Studio

Boost

2150

7353

191

154

2.3 k

1.4 k

Released

Description

Have you ever wanted a phone case with no compromises?

Check out my new Custom Phone Case Generator: CaseStudio

Boost Me (for free)

Do you like my model? A boost is completely free for you, and you really help me a lot to create more models like this in the future. Thank you very much

With this simple garden tool, you can always easily measure the correct distance and depth of the seed, it even has a legend where you can read the correct distance and depth. The model is also very quick and easy to print.
The first number in the legend is always the distance, the second number is the depth, which you can read from the lines of the tips. The first line is 0.5cm, the second 1cm, the third 2cm, the fourth 3cm…

The assembly is also very simple, simply insert the two main parts into each other, including the handle, and then screw the handle on from below with the two screws, after which you only have to screw in the required tips.

Membership

If you like my work and would like to support me or sell my models, you can subscribe to a membership here.

Join

Comment & Rating (191)

@user_2878928607

Boosted

Just wanted to share the results so far, my radishes and spinach have popped up out of the ground!

@user_2878928607

Boosted

they’re so big now!

@Xo39uH

Boosted

Print Profile

PLA Basic Profile

5* for the excellent idea, however: 1. One bolt has wrong thread 2. Had to drill the holes for the bolts using 1/2" bit, otherwise they won't fit 3. Writing on the tool: 25cm, 30cm, 35cm, 45cm... 40 is missing )

The profile uploader has replied

@sdaendi

Thanks for the detailed feedback, I changed it immediately and uploaded it, no idea how I didn't notice the 40cm. but since the spikes are printed with brim it could also be that it wasn't completely removed, but these should actually fit without drill.

(Edited)

@user_3491869180

Replying to @sdaendi :

No I had the same issue, the hole in the handle is the wrong size (when printing with PETG), needed to be 12mm.

(Edited)

@user_3491869180

Replying to @sdaendi :

Oh correction, not the spike screws, the screws for the handle..! :-)

@user_745550291

can you make one in inches?

@user_3268738773

me too, seed packs come in either metric or inches

@omfgbeky

Same. Inches please!

@Der_Papst

Print Profile

PLA Basic Profile

A very nice model. The print profile is perfect, all parts fit the first time. Thank you very much for your work, a very practical and useful device

Show original

@user_454156781

Print Profile

PLA Basic Profile

excellent, thank you very much

@Bigrayz24

Print Profile

0.2mm layer, 4 walls, 25% infill - Fixed handle screws

wife loved it and let me buy more filament because of it thank you for the great print!

@user_868866022

Print Profile

0.2mm layer, 4 walls, 25% infill - Fixed handle screws

Printed wonderfully!!! Thank you so much!

@22p.jsr

Print Profile

PLA Basic Profile

very practical helper for the vegetable garden. Printed from A1Mini. Here, the two arms of the holder were cut again in the slicer and provided with a dovetail. On the first attempt, there were still spaghetti on the overhang because it was cut in the Z direction and no supports were used. I could have known that. Furthermore, there was also spaghetti at the connection of the two arms. Attempt 2 turned out very nicely, tips 2-colored even without AMS. I am enthusiastic 🤩 👍

Show original

@Pietke

Print Profile

PLA Basic Profile

Perfect print and super easy to use! This garden tool is really perfectly implemented. The print ran absolutely smoothly – all parts fit right away, no post-processing needed. The assembly was also done in a few minutes: simply push together, screw, and you're done. I find the legend with spacing and sowing depth particularly practical – this way you always have the right orientation when planting. The tool feels good in the hand, appears stable, and is ready for use in the garden immediately. A clear recommendation for anyone looking for a useful and easy-to-print garden tool!

Show original

@LookOverThere

Boosted

Print Profile

PLA Basic Profile

So excited to used this in the garden. print turned out great and I loved making this in bright colors so I can find it easily.

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.