Search models, users, collections, and posts
Y-Splitter using PushFit for M10x1 and 1/2x18
Remixed by
IP Report
Print Profile(0)
Add the first print profile to earn points
Boost
1
0
0
0
6
1
Released
Description
Modified to allow both two different pushfits (e.g. I have 10x1 for 4mm and ½" 18TPI for 6mm PTFE tubes). 4mm PTFE tube comes from AMS and 6mm PTFE tube comes from dry box. If you want to use both 4mm PTFE tubes you can use original part ( https://www.printables.com/model/493962-y-splitter-m10x1-pushfit-magnet ) you can also find pushfits 10x1 for both 4 and 6mm but imperial 1/2x18 are more common for 6mm
onshape source: https://cad.onshape.com/documents/600c90c3d36cc0407fdae2c5/w/e9c3db9b6051220eb8c91994/e/e5303f130d727c72174f3d49?renderMode=0&uiState=647583d563b18e1702b9f2d8
Comment & Rating (0)