Mini Camping Tea Light Lantern - Free 3D Print Model

Search models, users, collections, and posts

Maxx Design

Household>Decor

IP Report

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Multi Color (No AMS required)

Designer

3 h

2 plates

4.9(358)

Single Color (Simplified body)

Designer

2.7 h

1 plate

4.9(120)

Adapter for taller tea lights

Designer

53 min

2 plates

4.8(6)

Open in Bambu Studio

Boost

3882

8924

826

606

5.3 k

2.9 k

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

D37.2x36.6mm LED Flame Tea Light Candle Set

Maker's Beginner Kit

Bambu Filaments

Select all

PLA Basic

PLA Basic

PLA Matte

Description

Boost Me (for free)

If you enjoy my designs, you can support my work with a boost!

An adorable mini tea light lantern inspired by traditional camping designs. Perfect for cozy atmospheres, this little lantern adds a warm, flickering glow to any space. Ideal for tabletop decoration or ambient lighting.

The multi color version can be printed without an AMS. It gives you quick access, allowing you to turn it off and on and change the battery without disassembly. Note this design was optimized for the Maker's Supply tea lights, I can't guarantee it to work perfectly with all brands.

It was designed to fit electric tea lights with a diameter of up to 40mm and a height of 17-27mm. The flame must have a diameter of less than 12mm.

If you are looking for a stand as shown in the photos, you will find it on my other Mini Tea Light Lantern: https://makerworld.com/en/models/926474

Assembly is very easy. First screw the shade into the lower body part, then screw the lid on. Make sure to not over-tighten these parts. You can consider a drop of glue to permanently fix these components. Now you can simply put the electric tea light in and screw the lower lid on until it sits tight. Don't use glue here.

The single color version was simplified and is potentially more robust, but will cause a little more stringing because it has longer travel moves when printing the shade. If you make sure your filament is dry, you can easily remove the stringing with a brief touch of a lighter / torch.

The cage is rather thin, so please handle with care to not break it! :)

Disclaimer: Only use this with electric tea lights!

This design is part of the Mini Lantern Collection! https://makerworld.com/en/collections/5446140-mini-lanterns

Commercial license available on MakerWorld and Patreon. Check out my profile for more beautiful designs!

Membership

Get a commercial license for my designs by becoming an Authorized Seller!

Join

Comment & Rating (826)

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.