Wholeheartedness

cover

tempImageMaqDiL.jpg

tempImagetOL78W.jpg

tempImagexkP4tg.jpg

tempImageMOaCCQ.jpg

tempImageQwwrBj.jpg

tempImagekEvAGL.jpg

tempImageKDg40I.jpg

tempImageXVqPSj.jpg

tempImageVZMldT.jpg

tempImageCFDXj2.jpg

tempImageYh7NvS.jpg

tempImageItItnc.jpg

tempImageTQlP4U.jpg

tempImageffLJm0.jpg

plate_1.png

tempImageQwwrBj.webp

0.2mm layer, 2 walls, 15% infill

tempImagedclHZ0.webp

plate_2.png

plate_3.png

Julien 3D

Capture d’écran 2025-04-28 à 11.40.30.png

Je conseille d&#39;imprimer le fichier en PETG-HF Bambu (Surtout pour du noir)&nbsp;&nbsp;

I recommend printing the file in Bambu PETG-HF (Especially for black)&nbsp;&nbsp;

Roman Redesign, no broken off inner holders, bonded together

user_2748891524

Screenshot 2026-03-12 at 4.21.23 PM.png

Screenshot 2026-03-12 at 3.58.40 PM.png

same as the other one Uploaded, this one is just 9 at at time, 7+2 extras to maximize print space&nbsp;Few improvements I made after printing lots of them for my self and my brother.Changed support to regular, which made printing speed faster and easy support removalResized to 101% according to many other people who commented to remove gaps.Filled in the gap in the picture, as I had that tongue part detach often when printing, as it was printing on separate supports and the joined at the end, but often that island would just when shifted by printer head, this way it is more reliable print. (i did only had this problem when printing with ASA, but ASA as far as i know is the best material to print this part with in terms of durability.Thank you very much for this beautifully designed wheel trim piece to the designer!! Probably one of the most useful 3D prints!

Easy to remove supports, 101% size, Gap removed for reliable

Few improvements I made after printing lots of them for my self and my brother.Changed support to regular, which made printing speed faster and easy support removalResized to 101% according to many other people who commented to remove gaps.Filled in the gap in the picture, as I had that tongue part detach often when printing, as it was printing on separate supports and the joined at the end, but often that island would just when shifted by printer head, this way it is more reliable print. (i did only had this problem when printing with ASA, but ASA as far as i know is the best material to print this part with in terms of durability.Thank you very much for this beautifully designed wheel trim piece to the designer!! Probably one of the most useful 3D prints!&nbsp;0.2 layer hight

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

特斯拉Model Y轮毂装饰保护圈（适用于特斯拉Model Y后轮驱动版19寸双子星轮毂。铝轮毂外漏的部分，经常受到碰擦，所以就建模打印了装饰保护圈，可以避免轮毂碰擦，同时也可以起到装饰作用。目前已行驶上万公里，虽然没有发现脱落现象但是缝隙中会有很多灰尘，类似于手机带壳保护的原理一样，时间久了应该会对轮毂造成不可逆的损伤，打印使用前望悉知。）

Tesla Model Y Wheel Hub Decorative Protection Ring (Suitable for the Tesla Model Y rear-wheel-drive version with 19-inch Gemini wheels. The exposed portion of the aluminum wheel hub is often subject to scratches, so a decorative protection ring has been modeled and printed to prevent scratches and enhance aesthetics.Having driven tens of thousands of kilometers, while no detachment has been observed, dust accumulates within the gaps. Similar to the principle of phone case protection, prolonged use could cause irreversible damage to the wheel hub. Please acknowledge this before printing and use.)

Tesla Model Y Wheel Hub Decorative Trim

ASIA

Print Profile(5)

Description

Comment & Rating (88)

License

Related Models