A1 Waste Bin Poop Bin Easily Detachable Snap-Fit Design Lightweight 40g Default Printer Settings - Free 3D Print Model

Search models, users, collections, and posts

来才来财张来财

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

H2D

X1 Carbon

X1E

P1S

P1P

A1 mini

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.4mm nozzle, 0.2mm layer height, tree support, all settings at default system values. Current material is PETG, change temperature if using PLA

Designer

2.8 h

1 plate

4.6(55)

0.2mm layer, 2 walls, 15% infill

3.2 h

2 plates

Open in Bambu Studio

Boost

140

329

994

667

Released

Description

Content has been automatically translated.

Show original

The bamboo frame connects to the printer with a snap-fit design, enabling quick installation and removal from the printer frame. This also prevents the bamboo frame from detaching during the printing process.
The bamboo frame and waste bin connect via a U-shaped snap-fit design, facilitating easy placement and removal. Beyond manual handling, it ensures secure attachment at any printing speed.
Printing parameters are set to default machine settings with automatic tree support.

Comment & Rating (75)

@Qiandao

Thank you, creator, excellent design! Unfortunately, it's unsuitable for my A1 mini due to width constraints I've created a more compatible version, available on my profile page

The designer has replied

Show original

@user_2872356939

You're a pro, how did you reduce the size? Did you redraw it? Or did you scale it during printing?

(Edited)

Show original

@Qiandao

Replying to @user_2872356939 :

Thank you! I only modified the width, as the honeycomb grid was no longer aesthetically pleasing after the width adjustment, so I switched to a bar grid

Show original

@user_2872356939

Replying to @Qiandao :

Expert

Show original

@Aferri2010

Boosted

Print Profile

0.4mm nozzle, 0.2mm layer height, tree support, all settings at default system values. Current material is PETG, change temperature if using PLA

The design is wonderful but it has a problem with significant vibration noise during printing I made a modification to replace the arm with magnets and it worked out very well The neodymium magnets measure 1 cm in diameter by 0.5 cm in height and 4 magnets are needed It is easier to remove and install with no vibration in the basket

(Edited)

Show original

@user_3392977118

Boosted

Print Profile

0.4mm nozzle, 0.2mm layer height, tree support, all settings at default system values. Current material is PETG, change temperature if using PLA

It's perfect. I love it

(Edited)

Show original

@Aferri2010

Boosted

I found this A1 model to be one of the most beautiful, but the arm that holds the basket isn't very practical and vibrates a lot, generating unpleasant noises, especially when printing generates a lot of vibration. I solved this problem by adding four neodymium magnets and cutting the arm. The trick to this project is to reverse the north-south polarity of the magnets on one side of the basket relative to the other, so that the basket always sticks in the correct direction and avoids the risk of sticking incorrectly during assembly, which would repel the unpaired magnet. It's much more practical, functional, and quiet; just bring the basket closer and it sticks correctly without effort. I'll post some photos, and you'll notice from the photos that just by bringing the base of the basket closer, it sticks itself in the correct position. I printed it in ABS for greater resistance to high temperatures.

@TLCx

Print Profile

0.4mm nozzle, 0.2mm layer height, tree support, all settings at default system values. Current material is PETG, change temperature if using PLA

model came out pretty good but it doesn't quite fit on the a1 mini. I have to have it barely on and it vibrates SO badly 😅

@cyril_colson63

Boosted

Print Profile

0.4mm nozzle, 0.2mm layer height, tree support, all settings at default system values. Current material is PETG, change temperature if using PLA

@fulvio81

Print Profile

0.4mm nozzle, 0.2mm layer height, tree support, all settings at default system values. Current material is PETG, change temperature if using PLA

@AntexL

Print Profile

0.4mm nozzle, 0.2mm layer height, tree support, all settings at default system values. Current material is PETG, change temperature if using PLA

@volyanskyy

Print Profile

0.4mm nozzle, 0.2mm layer height, tree support, all settings at default system values. Current material is PETG, change temperature if using PLA

@TaylorPrints_

Print Profile

0.4mm nozzle, 0.2mm layer height, tree support, all settings at default system values. Current material is PETG, change temperature if using PLA

Fresh off the printer! The details on this model are insane!

The profile uploader has replied

@user_2872356939

You understand the principles

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.