PANDA LUX LED COVER - A1 Mini - Free 3D Print Model

Search models, users, collections, and posts

Hottentotten

3D Printer>3D Printer Accessories

IP Report

GIF

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

1 h

1 plate

4.9(126)

With integrated light diffuser

1.3 h

1 plate

Open in Bambu Studio

Boost

270

634

206

678

571

Released

Description

Content has been automatically translated.

Show original

Cover for the Panda Lux LED Upgrade Kit for the A1 Mini

https://biqu.equipment/products/biqu-panda-lux-led-upgrade-kit-bambu-lab-a1

BIQU Panda Lux LED Upgrade Kit - 3DJake Deutschland PLUG&PLAY LED STRIPE

Having also treated myself to an A1 Mini, I naturally also needed a cover for the Panda Lux LED

Printed in gray PLA on the A1 Mini

No more direct glare from the LED lenses

The cover is secured with two M3 x 8mm screws

These screws secured the black transport protection on the A1 Mini

I have made the nine holes for the LED lenses slightly larger and also slightly elongated

This should prevent problems due to manufacturing tolerances of the LED strip

Simply insert the LED strip into the cover and screw it on the back

Alternatively, the cover could also be attached with double-sided adhesive tape on the back

Secure hold No more risk of the LED strip detaching during printing

INFO: The LED strip is only inserted into the cover Gluing is not necessary

Those who have already glued the LED strip must carefully remove it before assembly

Do you like the content? Then please rate it and leave a comment

Don't forget to click the thumbs up! 👍💬🌟

Boost Me (for free)

Your support would help me greatly

My other designs:

A1 MINI-Panda Lux Light Sensor Clip

A1 Mini - Panda Knomi Box

A1 - BIQU Panda Lux LED Cover by Hottentotten - MakerWorld

A1 - Panda Lux LED Light Sensor Clip by Hottentotten - MakerWorld

A1-AMS LITE - PTFE-Tube-Clip by Hottentotten - MakerWorld

NEW SUNLU SPOOL ADAPTER by Hottentotten - MakerWorld

PC POWER BUTTON PAWS PROTECTION FLAP by Hottentotten - MakerWorld

Comment & Rating (206)

@Sh33zyE

Boosted

Mine came out nearly perfect. Printed with Sunlu PLA on my mini. But any ideas on how to fix this droop? My print head is rubbing on it every time it goes by.

The designer has replied

@TH3deluxe

That shouldn't look like that. First, check if the object is still straight or if it might have warped when released from the heated print bed. Otherwise, you could loosen the screws slightly and insert a small piece of cardboard between the lower screw and the bed - see photo

(Edited)

Show original

@Sh33zyE

Boosted

It looks pretty straight to me, I will try that and if it doesn't work I will reprint. Either way, it's an excellent model and I'm glad you made it!

@TH3deluxe

Replying to @Sh33zyE :

Thank you very much

Show original

@sasha

I would like to thank the author for the model created and for sharing the original file I was looking for a light diffuser for my LED strip when I came across this model I read many reviews before printing it so I took it and modified it a bit to my liking also turning it into a light diffuser I hope you don't mind Printed in PETG-GF and PETG Translucent it turned out to be a masterpiece Thank you

Show original

@diniz.3d

Can you provide the model? Thank you!

Show original

@sasha

Replying to @diniz.3d :

i will try to updoal it shotrly

@Leuktra

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Super!

The profile uploader has replied

@TH3deluxe

Vielen Dank

(Edited)

@user_3860859543

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Excellent. Fits perfectly and holds. Very precise. You should print and use it directly instead of adhesive tape. It also glares less. A1 mini, Bambu PETG Translucent

The profile uploader has replied

Show original

@TH3deluxe

Thank you for the boost and the feedback

Show original

@ARRENDITI

Boosted

Printed in transparent PETG for maximum diffusion. Perfect fit

The designer has replied

@TH3deluxe

Danke fürs Feedback

@vladko

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

good design

The profile uploader has replied

@TH3deluxe

Vielen Dank

@ciccios993

Boosted

Truly well done, and undoubtedly a fundamental accessory if you own a Panda Lux LED strip. I printed it using Bambu Lab's Light Grey PLA Basic (10104), and the result, as you can see in the photos, is an accessory that appears to be original A1 Mini equipment

The designer has replied

Show original

@TH3deluxe

Thank you for the feedback and the boost

Show original

@omBratteng

Print Profile

0.2mm layer, 3 walls, 15% infill

Fits perfectly snug, and holds the Panda Lux very well in place. I'd say it's a must-have upgrade.

The profile uploader has replied

@TH3deluxe

Thank you for your feedback and rating

Show original

@user_251505481

how???

The designer has replied

@TH3deluxe

Did you stick the LED strip on beforehand

Show original

@Thorsten76

Print Profile

0.2mm layer, 3 walls, 15% infill

Super solution better than gluing

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

A1/A1 Mini fan cover

3D design

58.1 k

9 k

A1 - Panda Lux LED Cover

Hottentotten

1.6 k

558

Camera cover for A1 (not mini!) with Panda Lux LED

wusiu

103

Poop Deflector (A1 + A1 Mini)

ThreeD-Michael

84.4 k

11.6 k