Fujinet v1.6 Case for Atari 800 XL

Fujinet Case for the Atari 800 XL.  This will fit the v1.6 and v1.7 Fujinet PCB boards (and possibly others) sold by mozzwald.com and VintageComputerCenter.com stores.    I copied their case style for the XL series exactly.  I wanted to print one in matching color to my Atari 800XL.  As an upgrade, I added the ATARI logo to the back and the open source Fujinet logo to the front as a 1 layer inlay.    The case color I used is almost exact match "Beige 500" sold at printedsolid.com.   Logos are black.   Print face down on textured PEI plate and it will look great.  

An AMS is preferred for the Logo color change but you can print without AMS.  This is only a 1 color change print.  You can insert a Pause in the slicer G-code right after it prints the black logo and manually change the PLA filament color.   If you don't want the logo, just print it with one color.    The 4 screws are the same screws that came with original Fujinet case.