AMS Lite top mount. AMS enclosure top placement
Print Profile(1)
Description
Previous stands proved prone to dislodging during installation, prompting me to design this one after careful measurements, securely fitting my A1 as shown. Months of reliable use attest to its stability. For enhanced security, insert four 2cm diameter, 37cm long PVC pipes into the designated holes. Suitable for drying boxes with a base exceeding 30cm. Should the drying box exhibit slippage, consider applying a small amount of double-sided tape. A touch of adhesive may prove helpful if any looseness arises during assembly. My own tolerances proved perfectly adequate, necessitating no adhesive whatsoever. Refer to the final image for a visual representation. (The A1 model depicted in the image is from a design shared by a fellow maker a few days ago; feel free to explore it further at Bambulab A1 3D打印机模型 来自 vajojajo - MakerWorld)
The AMS lite mainboard utilizes a design by AMS LITE顶置封箱支持回转轴 来自 大聪明 - MakerWorld. The drying box and its internal support system employ a solution from 耗材干燥箱 amslite封箱回转轴支架 适配高颜值药品箱 二次创作 - 来自 小凡不是逗逗凡 - MakerWorld
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)