Cascade card wallet (Print-in-place) optimized

Remixed by

Cascade card wallet (Print-in-place) optimized

Remixed by
Boost
810
1438
642
GIF

Print Profile(9)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

[PETG-VERSION] 0.16mm layer, 4 walls, 15% infill
[PETG-VERSION] 0.16mm layer, 4 walls, 15% infill
Designer
2.7 h
1 plate
4.7(79)

[MONEY-EDITION-LARGER-VERSION] 0.16mm layer, 4 walls, 15% infill
[MONEY-EDITION-LARGER-VERSION] 0.16mm layer, 4 walls, 15% infill
Designer
1.9 h
1 plate
4.6(36)

[LARGER-VERSION] 0.16mm layer, 4 walls, 15% infill
[LARGER-VERSION] 0.16mm layer, 4 walls, 15% infill
Designer
2.1 h
1 plate
4.7(136)

[PLA] MONEY-EDITION 0.16mm layer, 4 walls, 15% infill
[PLA] MONEY-EDITION 0.16mm layer, 4 walls, 15% infill
Designer
1.8 h
1 plate
4.8(22)
Click to see more

Boost
810
1438
642
65
3 k
3.9 k
Released

Description

This is my remix of Hugo's model. optimized for Bamboo and PLA. The cards fit in perfectly and are easy to slide out.
The tolerances on the model have been adjusted.

* Space for 5 Cards

* Clip for Cash

14.01.2024: added Cascade card wallet with attachment loop / key loop

09.01.2024 added a PETG Version longer holding power like the PLA version.

The cards are still easy to push out

02.01.2024 added a 10x card Version. you can find here:

https://makerworld.com/de/models/120020#profileId-129164

31.12.2023 added Lager MONEY version: for those whose cards are stuck

30.12.2023 added Lager version: for those whose cards are stuck

Comment & Rating (642)

Please fill in your opinion
(0/5000)

Print Profile
[PLA] *fits perfectly* 0.16mm layer, 4 walls, 15% infill
I was print with bambu filament and Is bad print .
0
Reply
It looks as if you were using support material. Few factors that made me conclude: 1. Color 2. Support material like problems
(Edited)
0
Reply
Replying to @connorw :
lmao I think you're right, how do people manage to do this.
0
Reply
No i print with normal bambu petg
0
Reply
Print Profile
[PLA] *fits perfectly* 0.16mm layer, 4 walls, 15% infill
Works great!
The designer has replied
2
Reply
Really good. What is this for a Filament?
0
Reply
Replying to @icecube111 :
Sunlu Silk Silver PLA https://a.co/d/3G1bNmF
0
Reply
完美贴合,完美旋出,这设计太牛掰了! 对于现代人来说,出门都不需要带钱包了,只需要带卡包和手机,我很需要这个。
2
Reply
请问打印的时候,加支撑了吗?
0
Reply
Replying to @joecau :
不需要加支撑
0
Reply
Leider passen die Karten nicht richtig . Viel zu eng 😥
The designer has replied
0
Reply
dann nimm doch bitte das andere Profil [Larger_Version] Das ist extra für diejenigen wo die Karten nicht passen.
0
Reply
Replying to @icecube111 :
okay, danke für die Info
0
Reply
nimm die [LAGER-VERSION] nicht alle karten sind gleich breit. Die haben toleranzen.
0
Reply
This turned out so well. Blows my mind how this even works. Printed it with copper metal PLA. Holds 6 cards easily.
3
Reply
Print Profile
[LARGER-VERSION] 0.16mm layer, 4 walls, 15% infill
Printed okay but quite hard to move the cards in and out. Also feel like card plastic would deteriorate over time due to increased friction. Other than that everything is okay.
The designer has replied
1
Reply
use the [LARGER-VERSION] This is for those whose cards are too tight
0
Reply
Print Profile
[Min-Friendly]: 0.16mm layer, 4 walls, 15% infill
works right off the build plate
1
Reply
Print Profile
[Min-Friendly]: 0.16mm layer, 4 walls, 15% infill
works as advertised
1
Reply
Print Profile
[PLA] *fits perfectly* 0.16mm layer, 4 walls, 15% infill
Really enjoying this print - new to 3D Printing so when i discovered that the lever and everything work exactly as described I was quite impressed!
(Edited)
The designer has replied
0
Reply
Thx
0
Reply
Print Profile
[PLA] *fits perfectly* 0.16mm layer, 4 walls, 15% infill
Pla Printed. A little bit right but seems like will be Ok soon. Thanx for the model.
0
Reply