Front Panel Camera Version for Shorter Cable

I printed the camera mount https://makerworld.com/de/models/476062#profileId-387251 by @mlodybuk because I find the repositioning of the camera quite sensible. Unfortunately, I discovered that I have the printer version with a cable that is too short, so I cannot connect it once the camera is extended outward. I tried to compensate for the missing millimeters by slightly repositioning the camera, and it worked for me. However, extreme caution is still required when reconnecting the cable, and I would like to explicitly point out that you can easily bend the connector if you are not careful. Therefore, if you are unsure or inexperienced, do not attempt this modification.

I hope I can help one or two people with this.

If you like the project, I would be very happy about a boost.