Minimalistic Cable Organizer by tweak(c)ad

tweak(c)ad

Tools>Organizers

IP Report

GIF

Print Profile(7)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

V2 - 0.12mm layer, 6 walls, 15% infill

Designer

16 min

1 plate

4.9(393)

V1 - 0.12mm layer, 6 walls, 15% infill

Designer

16 min

1 plate

5.0(8)

V1 SMALL - 0.12mm layer, 6 walls, 15% infill

Designer

12 min

1 plate

4.6(14)

V1 SMALL - With brim

Designer

13 min

1 plate

4.9(8)

Click to see more

Open in Bambu Studio

Boost

773

1841

568

337

4.1 k

3.3 k

Released

Description

Just a couple of grams of filament and 15 minutes, that's all it takes to print this simple and minimalistic cable clip / organizer.
I really hope you like it.

Makes a really satisfying click when closed.

Boost Me (for free)

If you like my models, please consider to boost my models.
I would really appreciate it!

Please let me know what you think if you print this!

I have printed mine with PLA, PETG (recommended) PETG-CF, TPU (not recommended for obvious reasons) and PA/PA6-CF without a brim on textured PEI plate, high temperature plate and a random “carbon fiber” textured plate from aliexpress without any issues, but if you have bed adhesion issues, use glue or brim.

2024-05-19	Updated the model with a Lip to make it easier to open as suggested by sNaqchen ( Print profile V2 )
2024-06-01	Added .f3d as a downloadable file.

I know there is a lot of alternatives, but I designed this so it can store the cables more neatly, similar to a cable comb and most important: it is not bulky.

I have included 2 versions, a small for thinner short cables (>4mm diameter) and a 150% scaled version that works on longer or thicker cables.

I advocate the 150% version for most uses!
It is stronger and less finnicky* to use.
*Don't get me wrong, it is still really simple to use!

However, you can scale it to your liking in the slicer. I have scaled one to 200% for a couple of outdoor cables. Works just as great!

Comment & Rating (568)

@SprocketX

Boosted

Print Profile

V2 - 0.12mm layer, 6 walls, 15% infill

Such a simple yet great design. Prefer this much more over hinged ones. I also printed 200% and 250% and they still work great. Might try even much bigger for some bigger spools.

@tweakad

Nice! I haven't tried scaling past 200% so I'm glad to hear it still works great. If you print even bigger please let me know how it goes! 👍👍

@SprocketX

Boosted

Replying to @tweakad :

Definitely! I plan on trying to fill the A1 plate. It would be useful if it will work. Will tell how it goes.

@CryptoCamo

Print Profile

V2 - 0.12mm layer, 6 walls, 15% infill

I can’t have enough of these! Made some big ones too.

@tweakad

I am really glad that you like them. I still find more and more uses for them other than tidying up cables.

@CryptoCamo

I just love how I was cleaning around the desk and literally said, “Ugh I don’t wanna go to the store for Velcro straps…OH WAIT!! I’ll just print something!” 😂

@Keyren23

Print Profile

V2 - 0.12mm layer, 6 walls, 15% infill

came out perfect, used them to organize the power cable for a v1 Blink mini cam. thank you for sharing!

@tweakad

I am glad you like it!

@user_775797051

Print Profile

V2 - 0.12mm layer, 6 walls, 15% infill

Perfect for my cable clutter

@tweakad

Great! I am glad you like it 😊

@sNaqchen

Boosted

Print Profile

V2 - 0.12mm layer, 6 walls, 15% infill

great print and because of the new lip, it is much easier to open. thank you for the new version.

@tweakad

Glad to hear it worked out! Thank you for suggesting it!

@johannes_xD

The print profile is no longer public

Etwas schwierig beim lösen vom Druckbett, insgesamt aber gute Einstellungen.

(Edited)

@tweakad

Have you tried the profile without brim? The brim might only be needed for the small version. Thank you for the feedback!

@iLab3D

Boosted

Print Profile

V2 - 0.12mm layer, 6 walls, 15% infill

good

@Letcher77

Print Profile

V2 - 0.12mm layer, 6 walls, 15% infill

great

@FYO3D

Print Profile

V2 - 0.12mm layer, 6 walls, 15% infill

perfect for USB cables! 👍🏻🤗

@tomi671

Boosted

Print Profile

V2 - 0.12mm layer, 6 walls, 15% infill

nice

@tweakad

👌👌👌

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.