Desiccant Container for AMS - Handy Silica Dry Box by BamBam Design

BamBam Design

3D Printer>3D Printer Accessories

GIF

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

[PLA] 0.24mm layer, 2 walls, 15% infill

Designer

1.6 h

1 plate

4.9(50)

[3x] 0.24mm layer, 2 walls, 15% infill

Designer

3.4 h

1 plate

5.0(14)

[ASA|ABS => PLA works, too]0.24mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.8(11)

Full set w/ hygrometer

5.2 h

1 plate

4.7(10)

Boost

210

117

383

431

Released

Description

Yes another AMS silica box…

I tried out some boxes, but for me nothing works out perfect.

My box should be:

In and out without to remove a spool
Perfect printed in ABS and ASA → then you can dry desiccant with box in the oven
No long assembly
No long print time
Robust and not to flimsy
Clean design

Designed it from Scratch and it tuned out well.

Reflink for Silica Beans i used: https://amzn.to/3SLewNS

I think no one needs a assembly guide or a operation manual, the part stand on his own.

Happy Printing and enjoy the parts👍

Remix for Humidity Sensor added here: https://makerworld.com/models/147463

Side Pocket: https://makerworld.com/models/154298

bambulab silica dryer

Comment & Rating (117)

@Freekers

Amazing design. Would it be possible to include a cutout in the middle box for a Xiaomi Hygrometer? Thanks

The designer has replied

@BamBamDesign

Yes i try, i didnt has some lying around, but i ordered some round ones. I will upload soon😉

@Freekers

Replying to @BamBamDesign :

Great, thanks! Any chance of also designing one for the square white Xiaomi Mi 2 ones :) ? Thanks

@Shenaniganz

Replying to @BamBamDesign :

Any ETA on the hygrometer cutout? All I'm waiting for to print these :) Thanks!

@Mjd82

Boosted

Print Profile

[PLA] 0.24mm layer, 2 walls, 15% infill

all good thanks

The designer has replied

@BamBamDesign

Thank you for your review

@MicheleMM3D

Print Profile

[PLA] 0.24mm layer, 2 walls, 15% infill

Simply perfect

The designer has replied

@BamBamDesign

Thank you😉👍

(Edited)

@GenericUser

Print Profile

[PLA] 0.24mm layer, 2 walls, 15% infill

I’m impressed with these. I’ve had a tray version for ages and they’ve been ok but a kind of pain to get at. These actually fit and are ok to pull out while loaded with spools. Only using two currently but the hygrometer went ultra low for the first time ever. One thing I’d suggest is to make the bottom flat with no holes as they don’t serve much purpose in my opinion. Done in PETG and I’m seriously impressed with the lid fit 👍

The designer has replied

@BamBamDesign

Thank you very much for taking time to write that comment. 👍🏼 Your suggestion could be easy done. kind regards

(Edited)

@racecapps

Print Profile

[PLA] 0.24mm layer, 2 walls, 15% infill

Fits perfectly.

The designer has replied

@BamBamDesign

Cool, thank you for rating and share picture 🤩

@Pappaprintar

Print Profile

[PLA] 0.24mm layer, 2 walls, 15% infill

Thanks!

The designer has replied

@BamBamDesign

Your welcome. Thank you for rate and upload the nice picture 😎👍 You can also check out my other files😉

@outofmayo

Printed with Bambu lab PETG. once I got the Filament settings, dialed in, it printed great. Unfortunately, the machine did not acknowledge the successful print and so it won’t let me rate the model positively using the star system. 😏

The designer has replied

@BamBamDesign

Thank you for your comment👍🏼 Yes i know the star system sucks! Hope for an update. greetings

@Drickes

Print Profile

[3x] 0.24mm layer, 2 walls, 15% infill

4h53Min 92,3g Bambu PLA black 2 normal Container 1 closed Container for Hygrometer and 2 Side Container Thank you for your calmness and willingness to complete the model!