AMS Aqara Temperature and Humidity Integration Remixed by One Maker Show

Remixed by

One Maker Show

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

2.2 h

1 plate

4.5(11)

Boost

197

130

Released

Description

Everything is better with Home Automation 🤖

Get back the AMS Lost Piece

As you know AMS doesn't say the Real Humidity value. It gives a score from 1 to 5. If you like me go mad for data, you NEED this info.

THE CONCEPT

Like many of you, I have connected my Bambu X1C to my Home Assistant installation and I have made my own Custom Board (maybe released in the future) to get data and status.

The Missing Info info gets me Mad… How much Humidity is there inside AMS, Bambu Studio? Bambu Studio says it's ok. But How Much is it? Why do not put a Humidity a Temperature sensor inside It?

THE SENSOR

The smallest sensor available on the market (if you don't want to build your own) is the Aqara Temperature and Humidity Sensor.

You can find it on Amazon or on Aliexpress. Is a Zegbee Sensor, so you need a Zegbee hub or a proper Home Assistant installation.

BOOM

Now everything is under control, I know exactly when I need to change my silica gel or when my AMS filaments need to be dryer.

DISCLAIMER

If you know nothing about Home Assistant, Home Automation, Zegbee, and other technical stuff please do not ask questions in comments.

This is not the right place to discuss this, you can find tons of info on the web. Also, If you know about home assistant and you have integrated your Bambulab too please don't ask about my Custom board, it's a work in progress, I release It when ready.

__________________________________________________________________________

Hey, If you like my Stuff Maybe You also like my SHOW

Comment & Rating (18)

@muddle_lushes

Print Profile

0.2mm layer, 2 walls, 15% infill

Support Issue:The part of the model that this remix is based off of prints fine, but the bridging within the cutout for the Aqara hub seems…wrong.

The designer has replied

@OneMakerShow

I don’t have this issue. maybe you need a better machine calibration or simply you can add support. I don’t understand the 1 star point

@muddle_lushes

Replying to @OneMakerShow :

Well, it’s not personal. Every other print I’ve done has been practically flawless, except this one. If it were a calibration problem, I’d expect other prints and other parts to suffer the same issue. I simply downloaded the profile and printed on my X1C. I’m open to suggestions if you have any.

@OneMakerShow

Replying to @muddle_lushes :

Yep. Dry your filaments

(Edited)

@plomdawg

Print Profile

0.2mm layer, 2 walls, 15% infill

fits perfectly with my Hydra

@Striker72rus

Hi! Can you please share this interface for HA? I really liked it.

The designer has replied

@OneMakerShow

not at the moment. when ready I put it on github

@user_4193299983

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

amazing fit! thanks for your work!

@IAmTheFuzz

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect print. Aqara fit perfectly. Thank you! :)

(Edited)

@Natclanwy

Awesome idea! I mounted a Sonoff Sensor on the side of the AMS lid to report temps and humidity back to HA. Fits perfectly between the lid and the roll of filament.