Bambu A1 - A1Mini - Blink Mini - Rotating Holder - Free 3D Print Model

Search models, users, collections, and posts

Staffo79

3D Printer>3D Printer Parts

IP Report

GIF

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 3 walls, 15% infill

Designer

3.5 h

2 plates

4.8(8)

Open in Bambu Studio

Boost

Released

Description

This support is designed for the BLINK MINI (first model). If you are searching the same for the BLINK MINI 2 check out my other project:

https://makerworld.com/en/models/1084329#profileId-1076822

You will find 2 plates. The first is for Bambulab A1 and the second for the A1 Mini.

You need to remove the cover of the X motor to replace it by the printed one.

Fix the attachment to the camera case by superglue. Pay attention to the direction of the 2 pins. Fix the attachment with the pins in the same direction of the camera.

When the glue is dry insert in the cover plate and push till the end. Then rotate the camera and adjust the view angle.

My suggestion is to print the X motor cover in PETG but it works well also in PLA

bambulab a1 mini accessories

bambulab a1 accessories

Comment & Rating (10)

@On_The_Reg

Boosted

Print Profile

0.16mm layer, 3 walls, 15% infill

awesome design! printed perfectly with Bambu lab pls basic. this is perfect camera placement for the blink mini, I love it. thank you for the design!

@On_The_Reg

Boosted

awesome print! this is the best mount for blink mini cams, I have tried quite a few lol. thank you for this awesome design!

(Edited)

@BigGayBear69

Print Profile

0.16mm layer, 3 walls, 15% infill

Good print, perfect upgrade for my printer. Printed in Grey PETG.

@user_1114978582

Print Profile

0.16mm layer, 3 walls, 15% infill

All printed in PLA, with a small customization on the back I was worried the rotating pin would break while forcing it onto the plate, but it went well Tolerances are perfect

Show original

@user_2024911226

Print Profile

0.16mm layer, 3 walls, 15% infill

Danke

@ArnaudMout

Boosted

Very good idea and nice model, would be perfect if the piece you have to glue was printed in his final place !

@Wolly1991

Boosted

Print Profile

0.16mm layer, 3 walls, 15% infill

The optimal solution for an external camera ensures perfect camera placement

Show original

@ardianzen

Boosted

Print Profile

0.16mm layer, 3 walls, 15% infill

@GG1961

Print Profile

0.16mm layer, 3 walls, 15% infill

@niklash9112

Print Profile

0.16mm layer, 3 walls, 15% infill

Strength Issue:The camera mount is suboptimal and prone to breakage

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.