Bambu A1 - A1Mini - Blink Mini 2 -Rotating Holder - Free 3D Print Model

Search models, users, collections, and posts

Staffo79

3D Printer>3D Printer Parts

IP Report

GIF

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 3 walls, 15% infill

Designer

3.7 h

2 plates

4.8(17)

Open in Bambu Studio

Boost

107

160

115

Released

Description

This support is designed for the BLINK MINI 2. If you are searching the same for the BLINK MINI (first model) check out my other project:

https://makerworld.com/en/models/1023388#profileId-1005181

You will find 2 plates. The first is for Bambulab A1 and the second for the A1 Mini.

You need to remove the cover of the X motor to replace it by the printed one.

Fix the attachment to the camera case by superglue. Pay attention to the direction of the 2 pins. Fix the attachment with the pins in the same direction of the camera.

When the glue is dry insert in the cover plate and push till the end. Then rotate the camera and adjust the view angle.

My suggestion is to print the X motor cover in PETG but it works well also in PLA

Comment & Rating (26)

@aaronparres

Printed with PETG and so far it's strong and tight, let's see how it develops in time, Camera position and angle are perfect :) thank you

(Edited)

The designer has replied

@Staffo79

thank you too

@saltazekias

Print Profile

0.16mm layer, 3 walls, 15% infill

Robust, integrated, and effective

Show original

@hotthrower71

Print Profile

0.16mm layer, 3 walls, 15% infill

works

@jmkonzept

Boosted

Print Profile

0.16mm layer, 3 walls, 15% infill

Top, please print the connecting piece in a strong material so that the lugs do not break Otherwise, you may need to sand the connecting piece a little, but this may just be a coincidence

The profile uploader has replied

Show original

@Staffo79

In my print is enought apply a little force. Because mantein in position after installation and don't move by vibration of the printer

@jmkonzept

Boosted

Replying to @Staffo79 :

That was the case for me, otherwise it's perfect 👍🏼

Show original

@Jool99

Boosted

Super idea It would be interesting to indicate how to install it on the A1 In any case, great idea, easy and fairly quick printing for my A1 Thanks

The designer has replied

Show original

@Staffo79

Thanks

@kilikorro

Boosted

This model is excellent We shall see if it withstands vibrations over time Thank you

The designer has replied

Show original

@Staffo79

Gracias!

@paulione103

Boosted

Top work. Thank you very much!

Show original

@paulione103

Boosted

Print Profile

0.16mm layer, 3 walls, 15% infill

Excellent work!

Show original

@jose16

Boosted

Print Profile

0.16mm layer, 3 walls, 15% infill

@jmilari

Boosted

Print Profile

0.16mm layer, 3 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.