Mjölnir Piggy Bank A1 Mini

Thor's Hammer as a piggy bank. With coin slot and screw-on lid.

Printing plate 1 is printable, however, the supports may be difficult to remove, therefore I recommend printing the hammer in 3 parts and assembling it with the connectors.

The original has lettering on the round part, but since I scaled the model to 80%, I recommend printing it only with a 0.2mm nozzle. (Plate 9, 8 is without the lettering)

Printing plate 7 is the modified handle to fix it with a screw instead of just glue. Can be tightened with a 6mm Allen key.

I used https://makerworld.com/de/models/722204#profileId-653136 as a base.