Nice

Sie ist zu massiv. PETG mit 6 Wände und 30% füllung reichen.. Ich hätte sie mir etwas kompakter gewünscht und ich musste sie als Rechtshänder spiegeln. Ansonsten sehr gut. Grüsse Matt

Printed in ABS with the P1S. The print is perfect. It's a part for the newer XT600 models. Unfortunately, it won't fit the older 43F/47N models, as the original speed cable is reinforced and therefore thicker. Also, the older model has the cable on the inside of the fork, but that wouldn't be a problem. I think it will work perfectly for the newer XTs and XTZ750. Great design. Thanks and regards, Matt P.S. Check out my other work; I also have designs for the XT600 and other motorcycles.

nice.

For the normal P30 they do not fit so well, the magazines can only be inserted strictly. It's probably just for the SK. I printed them in PETG. They should be stronger. I recommend PETG CF, ABS or similar. Greetings Matt Please also take a look at my models 👍🏻

They turned out very well. I printed it from filament residues, hence the color change :) Greetings Matt Please also take a look at my models 👍🏻

Nice!

A really well done model. Thank you and greetings Matt

Very good, works brilliantly.

I had to drill the hole out a bit, but after that it worked perfectly. I also glued it with two-part epoxy; you never know with my wife ;)

Einwandfrei auf dem A1 Mini mit PETG.

Very well done, thank you. Matt

I did a test print to see if it also fits my model (not HNT 26), unfortunately not. The print has become very nice, the thumb rest is very nice. You inspired me, maybe I will draw one for my CZ457 shaft. Thank you

It fits very nicely, I would also have liked a version that lasts, will help me with a piece of double-sided tape. Printed on the P1S with PETG HF. with a pressure bed temperature of 70 degrees on the A1 Mini, it has not dried up so far.

Very good design! Just needed two squeegees. Printing instead of buying, perfect! They are not too hard not too soft. It is perfect to apply Sticker and window films. Thanks for the design!

tut was es soll.

passt gut, danke.

Passt super.

The printing was very easy for me on the A1 Mini and the profile provided by the designer. The spatula feels very good. Clean surface and the hardness fits well, not too soft not too hard. A great model. ⭐️⭐️⭐️⭐️⭐️ Take a look at my designs. Greetings Matt

5 ⭐️⭐️⭐️⭐️⭐️. works perfectly. Greetings Matt