A1/A1 Mini fan cover Honeycomp by Oxaspa

Oxaspa

3D Printer>3D Printer Parts

IP Report

Print Profile(5)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.08mm layer, 2 walls, 15% infill

Designer

15 min

1 plate

4.9(858)

0.16mm layer, 2 walls, 15% infill

Designer

11 min

1 plate

4.9(133)

0.12mm layer, 2 walls, 15% infill

Designer

12 min

1 plate

4.9(53)

0.16mm layer, 2 walls, 15% infill

Designer

11 min

1 plate

4.9(41)

Click to see more

Open in Bambu Studio

Boost

959

2149

1179

521

6.3 k

5.2 k

Released

Description

Honeycomb Fan cover for the A1/A1 Mini….

Comment & Rating (1179)

@haydenk

Print Profile

0.08mm layer, 2 walls, 15% infill

really good, but the stringing might go into the fan.

@Oxaspa

Stringing is primarily an issue of filament calibration and not of the 3D model itself. With proper printer settings and optimized filament calibration, stringing can be completely avoided. In my case, for example, there is no stringing at all.

@haydenk

Replying to @Oxaspa :

yeah ok thanks - thats just my review.

@HAFG

Hit it with a light touch of blow torch and it will clean the stinging up. I have to do it all the time with printing PETG.

@Abdul3112

Print Profile

0.08mm layer, 2 walls, 15% infill

Little bit of stringing (new filament) but fits perfectly

@Oxaspa

If it was perfect why did you only give four stars

Show original

@Abdul3112

Replying to @Oxaspa :

It fits perfectly, but it's not perfect Is it better now

Show original

@user_2116308346

Print Profile

0.08mm layer, 2 walls, 15% infill

Simple design, excellent fit

Show original

@Captain_Kills

Print Profile

0.08mm layer, 2 walls, 15% infill

Works great. Too bad it is difficult to remove the stringing, you don't want that to get in the fan.

@Denis_v1.0_beta

A half second hit with a kitchen blow torch (from a distance) will quickly and effectively remove stringing from the most hard to get places. No blow torch? Use the kitchen gas hob and hold onto the part with plyers. A very quick run through the flame will do the same job. A cigarette lighter will even do in a pinch. Quick, short exposure to the flame is what you want. :)

@ernests.customs

Print Profile

0.08mm layer, 2 walls, 15% infill

Fit perfectly on my A1 Mini! Adds a nice pop of color too.

@Mixvis

Print Profile

0.08mm layer, 2 walls, 15% infill

parfait 👍🏼

@rian_nair

Print Profile

0.08mm layer, 2 walls, 15% infill

Simply superb

Show original

@Petroslav04

Print Profile

0.08mm layer, 2 walls, 15% infill

Nice and fits good :)

@MariuszX

Print Profile

0.08mm layer, 2 walls, 15% infill

good :)

@DrthAwsm

Print Profile

0.08mm layer, 2 walls, 15% infill

fits perfectly

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

156

Print Profile(5)

Description

Comment & Rating (1179)

License

Related Models

Punisher Fan Cover

A1/A1 mini Fan cover

Vise Cover - TPU 90A/95A

Ergonomic Handle for Bags