Dice Tower Castle - Dungeons and Dragons (D&D)

You will test your fate with this Dice Tower Castle. 

The tower pairs well with dice from 6 sides to 20 sides. **Not included in the model*

Dice Tray 

→ You will roll your dice down to the tower and into the removable tray.

→Easily snap together with the dice tower castle.

* Dices inside and on top of the tower are not included.

Dimensions:

Tower:

• 137.80 mm
• 73.77 mm
• 72.15 mm

Tray:

• 19.50 mm
• 126.69 mm

• 97.50 mm

   

You need to print the two pieces. Although you can print only the dice tower if you wish.

• dice tower
• tray
• Can be printed in different colors or, if needed, printed just using one color.
• No additional parts are needed
• One plate print with the two parts

Design Features:

• Easy to Assemble: Simply connect the dice tower to the dice tray.

   

• Assemble instruction:
  • When assembling, remove the bottom support carefully. At the bottom of the dice castle, you will see 4 holes covered by the supports. Use the tool to puncture the holes and pull the supports one by one.
  • 
  •  
  • Although force is not needed because you will see that the tray, if collocated correctly, will fit perfectly. Ensure that both sides of the tray are aligned when assembling the tray. If needed, you could use glue. However, it should not be necessary because you should be able to remove it and put it back without any situation. 
  •       
• Should be easy to grab due to the practical design.

* Surrounding items and items inside and on top of the dice tower and tray are not included.