A1/MINI Poop Deflector - Free 3D Print Model

Search models, users, collections, and posts

C59

3D Printer>3D Printer Parts

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

MSPS Hex Poop Deflector V1.0

Designer

1.5 h

1 plate

4.9(107)

Open in Bambu Studio

Boost

410

910

275

860

617

Released

Description

A1/MINI Series Deflector MSPS

You won’t find it dead on the ground near the printer !

This deflector is designed to:

Redirect debris from the wiper into a bucket or container of your choice.
Soon to help collect debris and keep your work area clean with its convenient poop basket.
Reinforce the original wiper design for improved stability and functionality.
Feature a modern hex-pattern design with a Bambu logo for added style.
Allow customization of certain elements with color for a personalized touch, as shown in the "Make It Your Own" image.

Poop Basket Update
A basket will soon (No time frame) be available that clips onto the existing deflector. It offers ample capacity for those heavier loads, is rattle-free, and smooth as can be—no sticking in the poop basket.

Installation Instructions

Move the toolhead away from the wiper to create workspace.
Slide the print bed forward and raise the Z-axis for Allen key clearance.
Remove the bottom bolt and the front bolt on the gantry.
Pull the wiper toward the back of the machine and remove the cap.
Insert the MSPS into the gantry, pushing it until fully seated.
Loosely reinstall the front bolt to hold it in place.
Push the wiper into the deflector until completely seated.
Install the remaining bolt and tighten both bolts, ensuring proper alignment.

Your upgraded setup is now ready to go—enjoy the added functionality and sleek look!

Install Action HD Video:

V1.0 Specifications

Material: PETG (Bambu logo & HEX)
Printer Settings:

Profile: Standard
Layer Height: 0.20 mm
Mode: LUDICROUS
Infill: 20%
Walls: 4
Bottom Layers: 3
Top Layers: 5

Printing Details:

Supports: required
Print Time:
- Standard Mode: 1:14
Filament Usage: 0.90 oz
Estimated Cost: ~$0.64 (based on $26 PETG spool)

Streamlined Tube and Cable Management For A1 MINI

Tired of tangled cables or upgrades that just don’t feel right anymore? Check out my MSLPH Handle and MSZOC Z-Axis Cap, designed to combine functionality with style. These upgrades feature an integrated rear mount for tube and cable management, with one configuration already available and more exciting options on the way! Plus, the MSZOC includes a convenient lubrication port for hassle-free Z-axis maintenance.

👉 MSLPH Handle MINI
👉 MSZOC Z-Axis Cap MINI

👉 ASBB HUB Support A1/MINI

👉 AMPC PTFE x Cable Clip A1/MINI

Elevate your 3D printer setup today!

Boost Me (for free)

🚀 Boost Your Project! 🚀

If you love what I'm working on, hit the Boost button! Your support helps me continue to create, improve, and share even more exciting designs. Thank you for being part of this journey!

Enjoy your printing journey, and remember—keep your fingers away from the poop chute, she's angry!

"I’ll be sure to keep you updated with any future developments. If you come across any issues or need assistance, don’t hesitate to reach out—I’m here to help!"

Update:

2024-12-23 - Removed 0.04in between deflector and linear rail to improve front hole alignment.

2024-12-23 - Corrected Hex curve in the back around the extrusions just for better visual looking.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Current ver.1.0_12/18/2024

Comment & Rating (275)

@BigJB

Boosted

Pinned by Designer

Print Profile

MSPS Hex Poop Deflector V1.0

no issue with the print! easy install and I love the look!

The profile uploader has replied

@C59DL

The gray and black combination looks fantastic! Thank you for sharing your feedback and a great picture. I really appreciate the boost as well!

(Edited)

@hweckman

Print Profile

MSPS Hex Poop Deflector V1.0

Bed Adhesion Issue:It didn't stay on its plate properly. This is the only problem I've had but luckily I got some advice on how to fix this

The profile uploader has replied

@C59DL

Well if you wash your bed with the stuff in the back the chance to have bed adhesion is more than with dish soap and rinced properly, as with spray thing chance there some remaining of wtv in the bed! Is the 3 stars your choice or Makerworld doesn’t let you rate higher since you cancelled the print? Thanks!

@hweckman

Replying to @C59DL :

Makerworld does not allow reviews above 3 stars.I would be happy to receive advice. Which would be better, all-purpose cleaner or dishwashing detergent and of course rinsing afterwards?

@C59DL

Replying to @hweckman :

I was finding it convenient at beginning to just spray and wipe, I don’t know if this is what you are doing.. sure that your stuff rinced might be similar to dish soap. Removing residual deposit that could impact adhesion would help. If you look online some pray by Dawn dishsoap, I use dawn just because.. but a standard dish soap brushed with a brush that doesn’t have grease residue from dish cleaning to scrub, then rinced (100% required) especially hot plate will dry up the stuff before being wiped! And I use general microfiber cloth, a clean paper tower will do it but as long it doesn’t leave small piece behind haha. Always feel free to reach out to me about my design, I generally respond pretty quickly except between may to September it vary 😂

@Wesley_Rogers

Boosted

looks great!

The designer has replied

@C59DL

If you check my IG, you’ll see the AMEC cover with an integrated fan—it’s coming soon! But it looks like you already have something on top. Up to you! I appreciate you taking the time to share. ✌️

@Wesley_Rogers

Boosted

Replying to @C59DL :

I’ll be sure to look into it, always open to new options!

@piergi

Print Profile

MSPS Hex Poop Deflector V1.0

Slightly tight to insert, I had to smooth it, otherwise it's fine

The profile uploader has replied

Show original

@C59DL

Is this the part you printed in the other review you made a while stating that the PLA might be damp ? Thank you !

@piergi

Replying to @C59DL :

Hello, yes, I didn't recall having already written a review. I can remove it if you wish

Show original

@C59DL

Replying to @piergi :

haha don’t need to remove I was just curious by seeing the picture, sure there was something with the filament !

@Line50

Boosted

I printed the A1 Mini poop chute via SD card, so unfortunately I cannot directly rate the file The print in PETG white and black went smoothly – only the white could have been a bit more vibrant for my taste Assembly was easy, only inserting the Purge Wiper was a bit tricky, as it sits slightly crooked (could be due to material warping – it was my first print 😅) Overall, everything fits and works great I particularly like the screw fastening, which makes the whole thing nice and stable I'm giving 4 stars for the file and 5 stars for the print Great job – I really like your designs and optimizations for the A1 Mini! 👍🏻 My first boost goes to you

The designer has replied

Show original

@C59DL

Yes, maybe the bed wasn’t cleaned recently(Dishsoap + Water without any glue), or the ambient temperature was a bit too cold, causing the print to warp. I understand how it works when printing with SD or LAN only — I don’t have access to ratings either because of that. As for the color, I printed a black-and-white version with better contrast. Sometimes it depends on the filament’s opacity — if light passes through more easily when the print isn’t too thick, you can tell which one blocks more light. That difference can create a better visual effect. Thank you for taking the time to review and boost!

@R3DY.CO

Print Profile

MSPS Hex Poop Deflector V1.0

perfect

The profile uploader has replied

@C59DL

Looks great! Thank you ✌️

@user_2332033193

Boosted

Human error led to a broken x axis arm bracket for the tool head. You’re design was the only one that I found to resolve the issue. Well done. Amazing universal design. Thank you for sharing! What is this part named? and where’s the replacement files? lol

The designer has replied

@C59DL

I designed this deflector to reinforce the original purge wiper, it is cheap on Bambu lab if you want to replace your! (https://ca.store.bambulab.com/products/purge-wiper-a1-series) I’m happy to see that my design helped you to get back on track quickly. Thank you for boosting this thing! ✌️