Node Single Color 0.2mm layer, 3 walls, 15% infill
Turned out beautifly. Just waiting for the glue to dry. I wonder if the model could be adjusted so that the ribbon panels could just slide into channel slots. Wouldn't even need glue in that case.
Put down plastic wrap, some gorilla glue on to it, used old paint brush for nice even thin layer on box staying away from the edges because it will spread out once you press panel on. Then took elastics and wrapped them tightly around the top, middle and bottom and left them for like 5 or 6 hours to make sure they were good. Once elastics are on recenter panels, pinching the top and bottom of the box at the same time w/ fingers to make sure they didn't shift while you were putting them on.
Thanks for this absolutely beautiful model. I printed it on my P1S without ASM, with a 0.4 nozzle, Sunlu PDA+ filament and the original Bambu Lab textured PEI build plate.
Also a big "Merci beaucoup" for the good documentation which made it very clear which source files to use.
Hey,
i can't find the single color .3mf files. Can i just split the objects from the 2 color more fast .3mf, cause I don't have a AMS.
Can you Upload them or maybe im just blind.
Thanks and rly nice idea with this model.
Box Dual Color More Fast 0.2mm layer, 2 walls, 15% infill
Printed with PLA Premium and used gorilla glue to paste the side red bands. I missed painting the blue box top and bottom ribbons… the other two printed without prime tower and came out fine. These look like cartoon like objects, they really stand out and will be filled with candy for guests…
It's a PEO Build Plate from IdeaFormer.
You can find it in my documentation:
https://docs.brickbank.app/en/stuff/3D-Druck#accessories
I like this Plate, it gives the print a nice Surface
Hi ! just a little message to let you know that if you liked my gift box, a new variation is available especially for Valentine's Day on my page 😉
https://makerworld.com/models/168156
Thanks for this beautiful model. I will try the mono Version soon, too.
Here are some pictures of my print.
For anyone who wants to know printer Details:
- P1S without AMS
- 0.4 nozzle
- SunLu PLA+ white (printed with Bambu PLA Basic settings)
- Bambu PLA Basic green
- Bambu textured PEI Plate
Box Dual Color More Fast 0.2mm layer, 2 walls, 15% infill
Tolle Geschenkbox. Habe diese auf 200% vergrößert und gedruckt. Sieht klasse aus und so kann ich meine Geschenke darin verpacken.
Die Box hat sich super drucken lassen und der Mechanismus funktioniert perfekt.
Danke für das bereitstellen der Daten.
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.