The PegFinity System!

This is a modular system based off of the standard 1"x1" peg board holes. These allow more secure attachment while still allowing EASY removal of modular trays, racks, bins, and more. All trays, bins, and racks are also based off the peg board spacing, so they are all 1" increments in size, allowing stack-ability and side by side mounting. The only hardware needed are 1" Coarse Thread Sheetrock Screws or something similar. I printed all parts in PLA+, which suits me fine for the occasional use that I require. PETG may work better for some, at least for the clips. Most of the trays are fairly robust and not thin.

Bins!

There are 3 bin types.

The “No Handle” is designed for the Horizontal racks only and these have the “finger” hole in the top. There is just no possibility to have this in the Verticle style without having larger “dead” zones between units for the space for a finger.

The “With Handle” can be used in either the Horizontal or Verticle bin types. And they look great!

The "Tippy Bin" bin is what the name suggests, a “retained” bin the tilts out for access. These can obviously only be used with the tippy style racks. Which are only in the Horizontal direction. For the same reason as the "no handle" bins above.

Clip options!

You can use all three styles of clips if you wish. But the “Joining” clip is where this shines. Allowing you to “butt” together multiple bin racks with no gap between! Start with the base clip at the bottom start point, place a rack, add a joining clip, then another rack, and keep stacking!

You can also make these removable with the standard "Clip V1" at the top of the bin racks. Just like the other Pegfinity trays like the socket set trays!

Just Clips!

https://makerworld.com/en/models/754780#profileId-688871

Socket Set trays!

https://makerworld.com/en/models/749368#profileId-682855

Paper Towel Dispenser!

https://makerworld.com/en/models/752909#profileId-686843