Bambu Lab Side Spool Holder P1S / P1P / X1C

Bambu Lab Side Spool Holder P1S / P1P / X1C

Boost
586
1106
282

Print Profile(3)

All
P1P
P1S
X1
X1 Carbon
X1E
A1
A1 mini

0.2mm layer, 2 walls, 100% infill
0.2mm layer, 2 walls, 100% infill
Designer
3.5 h
1 plate
4.8(161)

Optimised for filament usage, speed, strength, and multicolor
Optimised for filament usage, speed, strength, and multicolor
2.5 h
1 plate
4.8(56)

(2) Light Duty Bearings for this Model
(2) Light Duty Bearings for this Model
26 min
1 plate
4.8(6)

Boost
586
1106
282
25
2.2 k
1.5 k
Released

Description

My Version of a stable Side Spool Holder.

The Holder an the Filament Guide can be printed support free.

Printing the Role upright.

The PC4-M10 thread should fit well

Best printed: Infill 100%

Apart from printed parts you will also need:

  • 4x M3x20 screws
  • 2x 608 ZZ ball bearings (8mm x 22mm x 7mm)
  • 1 x PC4-M10


Have fun printing

Comment & Rating (282)

Please fill in your opinion
(0/5000)

Print Profile
Optimised for filament usage, speed, strength, and multicolor
Printed and works great. Some old Bones Reds bearings came in handy. Just waiting on my pc4-m10 connectors to get here. I used M3 12mm on the tube holder as 20mm seemed way too long.
The designer has replied
2
Reply
somehow 20mm is the perfect length
(Edited)
1
Reply
thank you for rating!
(Edited)
1
Reply
Replying to @Joshua_ :
On my X1C, the two holes for the filament guide are 9mm apart and the model is 10mm. The spool holder fit correctly though. Also, 20mm screws for the filament guide are too long for my machine. Those two holes bottom out very quickly and I had to use a 12mm.
(Edited)
2
Reply
Print Profile
Optimised for filament usage, speed, strength, and multicolor
Bei dem hier integrierten Profil hatte ich Warping-Probleme an der PTFE Führung woraufhin ich den Druck dann abbrechen musste. Die Dateien selbst geslicet war das alles kein Problem mehr. Schade dass der Radius an der Rollenhalterung nicht dem Radius am Drucker entspricht. Das ließe sich sicherlich in wenigen Minuten abändern und würde optisch deutlich besser aussehen als so eine Lücke dort zu haben. Für mich als kleinen "Perfektionisten" fast schon eine mittelschwere Katastrophe.
The designer has replied
0
Reply
my apologies. what did you change when you sliced it yourself? thanks for pointing out the problems!
0
Reply
if you added a brim though, please make sure your bed was cleaned with a reputable brand of dish soap, not ipa. while ipa can work, a reputable brand of dish soap gets rid of most of that junk.
0
Reply
Replying to @Joshua_ :
Ich Reinige mein druckbett noch jedem Druck. Ich denke nicht dass es eine Verunreinigung gewesen ist. Aber wer weiß das schon. Das Teil hat sonst tadellos gehalten, bis auf das Ende in dem das Fitting eingeschraubt wird.
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
edge banding,I printed three times,had same problem,what’s happened?
(Edited)
1
Reply
why I printed the holder,always bending at edge? three times,what happened?
0
Reply
why I printed the holder,always bending at edge? three times,what happened?
0
Reply
Replying to @hktsenga :
you have poor bed adhesion. I recommend googling how to improve it. you could include a raft and skirt and may also need glue.
(Edited)
0
Reply
Didnt quite get this work very well. After attaching the bearings and mounting the holder, its so much friction the center roll wont turn. Dont know what im doing wrong here? Also the spool holder bracket is not shaped after the printers corner, but maybe its not suppose to?
0
Reply
I've had the same issue but I tried sanding the bearing surfaces down (flat sides) and it actually freed up the movement quite a bit.
(Edited)
0
Reply
@projectorize https://makerworld.com/en/models/411965#profileId-313885 this remix matches the radius of the bbl machine
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
Wow what a difference this has made. New to the scene and was having to move my printer to change filament. This was easy to print although, I had to file down all of the edges of the roller and roller insert slightly to get it to roll with the bearings. Runs great and no more moving the printer!
The designer has replied
1
Reply
Thank you! I uploaded an improved spool as STL in the RAW Model files :)
0
Reply
Print Profile
Optimised for filament usage, speed, strength, and multicolor
printed excellently and is the perfect size to fit over my trash box for the poop chute
The designer has replied
0
Reply
thanks for rating! I like your pc
0
Reply
Print Profile
Optimised for filament usage, speed, strength, and multicolor
Nice
The designer has replied
0
Reply
thanks for rating!
0
Reply
Came out really well only used the filament guide from this print, made parts from two others to make what I wanted and needed.
0
Reply
you got an stl for the filament holder :)?
1
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
Ultra comoda la bobina di lato
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
Flawless
0
Reply