Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA HATCHBOX BLACK
PLA HATCHBOX GREEN
PLA HATCHBOX BLUE
PLA BambuLab Matte Ice Blue
PLA HATCHBOX YELLOW
PLA HATCHBOX ORANGE
PLA HATCHBOX WHITE
Swap Instructions:
Start with BLACK
At layer #4 (0.4mm) swap to GREEN
At layer #5 (0.48mm) swap to BLUE
At layer #14 (1.2mm) swap to Ice Blue
At layer #18 (1.52mm) swap to YELLOW
At layer #20 (1.68mm) swap to ORANGE
At layer #21 (1.76mm) swap to WHITE for the rest.