Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

Filaments Used:
PLA+ Esun Black Transmission Distance: 0.6
PLA+ Esun Blue Transmission Distance: 1.6
PLA+ iBoss Light Blue Transmission Distance: 2.3
PLA+ Esun Cold White Transmission Distance: 1.6
PLA+ Esun Red Transmission Distance: 3.4
PLA MonoPrice Yellow Transmission Distance: 3.2
PLA+ iBoss Green Transmission Distance: 1.8
This print uses 7 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue
At layer #7 (0.64mm) swap to Light Blue
At layer #9 (0.8mm) swap to Cold White
At layer #13 (1.12mm) swap to Black
At layer #15 (1.28mm) swap to Red
At layer #18 (1.52mm) swap to Yellow
At layer #22 (1.84mm) swap to Cold White
At layer #25 (2.08mm) swap to Black
At layer #26 (2.16mm) swap to Green
At layer #29 (2.4mm) swap to Yellow
At layer #31 (2.56mm) swap to Cold White for the rest.