Grumpy Cat Meme (hueforge)

Grumpy Cat Sign (hueforge). I got up for this? we have all felt that way when confronting a difficult day. hope you enjoy this piece.

this is a quick 4 color print, takes a little longer but needed the blending for the cat to look right. Enjoy!

Note:

This is shown with Sunlu Gray and Sunlu Orange, but you can substitute other colors as well a Red and orange work as well for a slightly different look. The main cat color will come out for pretty any color you substitute for the orange, and the othe color is the darker highlights. There is a little blending, but it should still come out great. Post up a photo of your different color variations it you give one a try.

See Printing instructions below.

you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence.

Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount

Printing Instructions:

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.6mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (1.08mm) swap to Grey
At layer #9 (1.2mm) swap to Orange
At layer #13 (1.68mm) swap to White for the rest.