Bambu Lab Filament Display Model Stand

Link to my other models - Thangs, MakerWorld and Printables (photos at the end of the page)

- - - 

A custom made display model stand for Bambu Lab filament display model* by Henlor

Swirl >> Filament Display Model

Latest version: v2

Feel free to also check out a Skadis version 

Prints with no supports as the 2 higher shelves are connected via snap and rectangular connector (version 1 = v1)

Make sure your print bed is clean and grease free for good adhesion.

I personally had aux fan off to prevent warping (Bambu Lab p1s).

Wait for the print to cool before taking it off the plate.. again.. who wants a warped print? :)

*Filament model is printed without the top layer, simply flip it upside down and place on the stand

Filaments used: 

• Big Stand - SUNLU Meta Grey
• Mini Stand - Bambu Lab Matte Dark Blue

Mini Version available as a separate print profile:
 

UPDATE INFO:

• Improved version (v2) of the stand (both connectors on the main stand (14) are stronger)

• 2 new connectors introduced, now you can attach one stand to another
   

  

  

   

There is also a small extension you can print and glue on, so the filament sample is harder to knock over.

Please let me know if there any problems with any of the new models so I can fix it :) Thanks!

You can show your appreciation by Buying me a coffee :) 

And finally… I would like to say a big Thank You for all your feedback and support. It really means a lot and helps me create better models :)

New Model Upload: Skadis

All models are for personal use only. You are not allowed to sell physical prints of my models without an active subscription to My Commercial License