Adjustable Rope Clamp Rope Tensioner (Parametric)
Boost
78
138
17
Print Profile(3)
All standard sizes, 0.2mm layer, 3 walls, 30% infill
3.5 h
10 plates
PLA 0.20mm
4.6 h
10 plates
0.2mm layer, 3 walls, 30% infill
3.5 h
10 plates
Boost
78
138
17
2
201
156
Released
Description
This is my first try to make a parametric model, this means you can change the model's size by changing a parameter. For this you have to open the .f3d-file in Fusion360. Then go to the “Modify”-menu and click “Change Parameters”.
There you can change the parameter for the diameter of the rope.
The diameter has to be at least 3.1mm, otherwise the calculation will fail. Don't touch the "Tolerance"-Parameter.
For those that are not familiar with Fusion360 I uploaded the model in sizes from 3-12mm rope diameter.
Comment & Rating (17)
All
Boosted
Just what I was looking for to hold the rope on my trampolin cover 🙂
0
Reply
Print Profile
All standard sizes, 0.2mm layer, 3 walls, 30% infill
works as expected, easy print
0
Reply
Print Profile
All standard sizes, 0.2mm layer, 3 walls, 30% infill
Funktioniert super
0
Reply
Print Profile
All standard sizes, 0.2mm layer, 3 walls, 30% infill
prints well. screw works well.
0
Reply
Print Profile
All standard sizes, 0.2mm layer, 3 walls, 30% infill
PETG
0
Reply
Print Profile
All standard sizes, 0.2mm layer, 3 walls, 30% infill
i pezzi piu piccoli non si avvitano e slittano mollando il cavo!
ho stampato ad alta precisione!
0
Reply
thank you, I will give it a try...
0
Reply
Boosted
Print Profile
All standard sizes, 0.2mm layer, 3 walls, 30% infill
0
Reply
Print Profile
All standard sizes, 0.2mm layer, 3 walls, 30% infill
0
Reply
Print Profile
All standard sizes, 0.2mm layer, 3 walls, 30% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld