Storage Box (Screwless|Parametric) by RDesigns

RDesigns

Tools>Organizers

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

The Allround Box V1.5

Designer

106.8 h

30 plates

5.0(4)

Lockpieces

Designer

2.3 h

4 plates

5.0(3)

Boost

201

171

Released

Description

Assembly guides are following soon!

But it is as easy as it looks, just push raw filament in every hole where a screw would otherwise be in!

Sizes

If you need a special size of this box and don't want to use Fusion 360, just write a comment and explain what size you need!

TPU Seal

The TPU Seal isn't needed, but it will improve the overall performance of the latch pieces drastically!

If you don't use the TPU Seal make sure to use the specialized lockpieces to get the same fit.

Releasenotes:

V1.5 Release:
- This new version of The Allround Box solves a lot of problems from the previous versions.
- New feature for the parametric file: Now you can adjust the latch size easily.
- Parametric file issue fixed: After adjustion the width, sometimes the box was missing one of the outer ribs.
- The latch mechnisim should is now improved to work way smoother.
- New page renderings are now used.

Comment & Rating (28)

@ecominguez

HI, it is me again, Thank you a lot for share this design, and the fusion 360 file, thank you. I have another question... I wanted to print a box, very small, with one latch, and I couldn't using the parameters, could it be?. It does nothing if I choose 1 latch. I am sharing a picture, I forced the sizes and printed, but obviously it didnt' work, the latch is too big, the hinges are not right... etc. Is it possible to print something like this modifying some parameters? (I know I can modify the design to fix it... but I would like to know if just changing parameters I could do something this small with only one latch) thank you!

(Edited)

The designer has replied

@RDesigns

Hi, if you only want one latch, it's impossible with this file, but there is The Allround Box MINI, which is basicly the same box design, but with only one latch.

@RDesigns

https://makerworld.com/en/models/415378#profileId-317545

@ecominguez

Replying to @RDesigns :

At the begining of this design I see in the pictures, some boxes with one latch, so I thought that it was possible. I will try the mini then no problem. Would be great, and I will see how, to have this possibility with this file, it seems like is not so far from working. But no problem, thank you!

@CanDo

A great thanks for sharing your Fusion file! It was interesting to look through the model hierarchy and see how you built it. Please take my feedback as constructive. In your next revision perhaps add limits to the rotational joint for the latch, as it can be moved to overlap with / rotate through the case parts. The Mainbody could also be moved to a separate component, like the lid and Lockpieces. I also note that when the latch is closed (and presumably pushed upwards by the O-ring) in the Fusion model, there appears to be a small gap between the O-ring and the lid at the front (right in the screenshot), whereas at the rear (left in the screenshot) there is no gap. I haven't printed one to test this, but can you confirm how this looks on a printed part please? When a large hinge width was specified in the parameters, the hinge extended beyond the edge of the box (in the screenshot). If the reference edge for the hinge was the outer, rather than inner edge, this may work better. If I may suggest a feature, some ridges, grooves or other relief features (perhaps circular) on the top and bottom would add some stability when stacking boxes on top of one another, preferably without having to 3D print any support material. A great model! Please take my feedback as constructive. I look forward to printing one of these.

(Edited)

The designer has replied

@RDesigns

Hi, thanks for your really interesting feedback. As you found out, the joint limits are missing on the latch, I will ad these soon. But the latch mechanisim is in a pretty final state. The gaps are for material tolerance purpose and achieving the perfect click haptic. The Idea with some ridges and grooves is nice and I have had it too, but it will take me some time to implement something like this.

@crash

Print Profile

The Allround Box V1.5

amazing box!

(Edited)

@h.granlid

Print Profile

Lockpieces

@ecominguez

I am printing this one now. The Bambu Studio ask me to add supports... is it needed? thank you.

(Edited)

The designer has replied

@simon.murrell

should not need support or brim

@RDesigns

Hi, support‘s aren‘t needed!

@hahacky

Where does one find the Fusion 360 file? Thanks

The designer has replied

@ecominguez

I also couldn't find it at first, but if you choose The all arround box 1.5 and then in the Download or print green button choose Download STL, then a list will be opened and have there the Fusion 360 file.

(Edited)

@RDesigns

Replying to @ecominguez :

That‘s right!

@user_3078835793

Hi, the taller you make the box the thinner the locks get. if you go about 65mm in height it freaks out. im trying to make one that is 92wx75hx130L inside.

The designer has replied

@RDesigns

Ohh, thanks for the feed back! There some dimension in the sketch for the lockpieces is missing. I will upload a new Version in a few minutes!

@user_3078835793

Replying to @RDesigns :

awesome thankyou

@user_1392136458

Great workt, i love the Boxes, thank you. I just have problems to fit my filament trougt the holes of the wheels. I have to print them 102% size on my A1.

The designer has replied

@RDesigns

Hi, thanks for the feedback! The fit is a tighter at the front, so you don‘t have to clue in the filaments. I recommend to some pliers to push the filament in.

@ecominguez

I am printing this one https://makerworld.com/en/models/400045?from=search#profileId-310159 but after started the print, I saw a comment that sent me to this Storage Box (Screwless|Parametric) I am confused, which is the one I should use?. Thank you.

The designer has replied

@RDesigns

Hi, at the moment it‘s a little confusing, but i would recommend to print the new one which is the „Storage Box (Screwless|Parametric)“. The other box won‘t be avaliable anymore soon.

@seymour

Hello, thanks for the model, seems very nice. any plan to make it gridfinity compatible maybe?