X1C Remix for AMS Riser Remix (12mm Lightstrip) by maCyo42 Remixed by maCyo42

Remixed by

maCyo42

3D Printer>3D Printer Accessories

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

Part 5&6 @0.12mm layer, 2 walls, 15% infill

Designer

7.2 h

3 plates

4.8(40)

TPU Button Inserts @0.16mm layer, 4 walls, 15% infill

Designer

15 min

1 plate

5.0(6)

0.12mm layer, 2 walls, 15% infill, Ironing on green top surfaces

8.8 h

3 plates

5.0(5)

Open in Bambu Studio

Boost

102

215

889

563

Released

Description

NEW AMS Riser V2 is released

This is the X1C Front Dash Remix for my AMS Riser Remix (12mm Lightstrip) by maCyo42 that Supports Full up to 12mm COB Led Strip, a second Build Plate Slot an many other improvements like Spool Holder Left and Right.

IMPORTANT
i haven´t printed the X1C Versions but the P1S Version is nearly the same. Please keep this in mind if you want to print this Version.
It would be nice if someone who want to print this Comment with an Make incl. Picture after printing.

You need the Parts of https://makerworld.com/de/models/54960#profileId-56523 to complete the Project except of the P1S Front Dash Parts.

happy printing

Comment & Rating (69)

@badwolfe70

Print Profile

Part 5&6 @0.12mm layer, 2 walls, 15% infill

printed well

(Edited)

@kuhnikuehnast

what filament did you use?

@badwolfe70

Replying to @kuhnikuehnast :

All done with eSun PLA+ filaments

@StefanE.

Print Profile

Part 5&6 @0.12mm layer, 2 walls, 15% infill

Leider sind die Ecken zu klein. und bei der Verbindungsstelle zum Hauptteil sind es keine 12mm da dort leider eine Wand ist (rechte Seite).

@Quantum.Grower

Print Profile

Part 5&6 @0.12mm layer, 2 walls, 15% infill

Thank you @maCyo42 for the 12mm X1C remix. I added a profile that irons the green because my green was not laying down too well. My X1C didnt do a very good job of ironing the black, but at least its functional. I might try to reprint without ironing on the black, but this will do for now. I'm still giving this profile a 5* because I think my green PETG was the issue. Thank you!

@Debugman

感谢@maCyo42制作的 AMS Riser Remix 12mm X1C，但是我今天遇到了问题，暂时还不知道问题出在哪里，我是新手，还不确定是软件设置问题，还是机器问题，我只是更改了颜色，用的默认参数，开启了擦拭塔，效果如图，有人知道问题出在哪里，怎样解决它吗？谢谢！

@3DKahuna

Print Profile

Part 5&6 @0.12mm layer, 2 walls, 15% infill

printed perfectly. I colored mine a bit differently.

@blastbeatproduc

Thank you for your hard work! Is there a file for the TPU parts that would go here? :)

The designer has replied

@maCyo42

thank you you need the Button Inserts from the Original https://makerworld.com/models/19535#profileId-19420

@blastbeatproduc

Replying to @maCyo42 :

found everything, I was just blind and stupid. Dankeschön!

@user_2114392215

Replying to @maCyo42 :

I printed all the tpu pieces from the original model, but I dont see the strips that go across the top of this one. The original didnt have that area for a strip so I dont believe they created these TPU pieces. I tried the strips and the plugs do not align.

@ava.fleming022

Print Profile

Part 5&6 @0.12mm layer, 2 walls, 15% infill

@kg7eu.3d

Print Profile

0.12mm layer, 2 walls, 15% infill, Ironing on green top surfaces

Printed perfectly and looks great!

The designer has replied

@Quantum.Grower

Glad to hear it! Thanks for the feedback.

@Maximumdreamers

Print Profile

TPU Button Inserts @0.16mm layer, 4 walls, 15% infill

They work. Not as squishy as I thought they'd be but infill could be adjusted. With that said, I think it is just supposed to be a less harsh surface to interface buttons to machine... Adjustments are probably not necessary. =)