I made a hueforged picture of the car of my neighbour, an nissan qashqai. Have fun with it!

If you are missing a shelf to put the picture or the other Hueforge pictures on the wall, take a look at my HueShelf ;)

Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Dark Gray Transmission Distance: 2.5
PLA Gray Transmission Distance: 3
PLA White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #12 (1.04mm) swap to Gray
At layer #18 (1.52mm) swap to White for the rest.

Share your results :)