HueShelf - Simple Hueforge Shelf - Simples Hueforge Regal
Copyright Claim
HueShelf - Simple Hueforge Shelf - Simples Hueforge Regal
Boost
79
149
18
Print Profile(2)
HueShelf - Faster - 0.2mm layer, 2 walls, 10% infill
Designer
35 min
1 plate
HueShelf - 0.2mm layer, 2 walls, 25% infill
Designer
1.5 h
1 plate
Boost
79
149
18
0
157
135
Released
Description
I made a simple shelf for our hueforge pictures which don't have a place and lays everywhere in my office. Now you can print a shelf with (or without) screwholes and put them on the wall. I inserted a deepening to let them stay safe and make a quick change possible.
The maximum width is 200mm, I think the most of your hueforge pics should be able to place on it. I will upload a second, wider, shelf for bigger pictures, watch my profile.
Printtime is about half an hour and you need supports.
Have fun and give feedback ;) And if you want follow me on Instagram ;)
Comment & Rating (18)
All
Was able to print these without supports, or brims just by rotating them vertically. Great use for some of the rolls I have with barely anything left on them
1
Reply
Print Profile
HueShelf - Faster - 0.2mm layer, 2 walls, 10% infill
does it’s job holding the print. very clean
0
Reply
Print Profile
HueShelf - Faster - 0.2mm layer, 2 walls, 10% infill
1
Reply
Print Profile
HueShelf - Faster - 0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
HueShelf - Faster - 0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
HueShelf - Faster - 0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
HueShelf - Faster - 0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
HueShelf - Faster - 0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
HueShelf - Faster - 0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
HueShelf - Faster - 0.2mm layer, 2 walls, 10% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld