Here's my hueforged CD-Cover of the Beatles, if someone wants it to print, have fun with it ;)

If you are missing a shelf to put the picture or the other Hueforge pictures on the wall, take a look at my HueShelf ;)

Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Dark Gray Transmission Distance: 2.5
PLA Gray Transmission Distance: 3
PLA White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Gray
At layer #13 (1.12mm) swap to Gray
At layer #18 (1.52mm) swap to White for the rest.

Share your results with us! ;)